Bluetooth Based Smart Home using atmega8 microcontroller
This project is used to automate the home appliances through Bluetooth enabled PC. You can use the USB Bluetooth at the PC side and an Serail Bluetooth converter is used at the microcontroller side. The sparkfun bluetooth module is used here, but you can use any serial bluetooth module which supports SPP profile. Atmega8 microcontroller is used in this project
The PC application software was written using visual basic and the microcontroller coding was done through Bascom Basic. The project had the following features
- 2 Temperature sensor (1 Indoor & 1 Outdoor)
- High resolution temperature sensors are used (0.06deg)
- 1 Light sensor with help of LDR
- 1 PIR motion sensor
- 5 Devices can be controlled
- LCD & LED interface to display the status
Post your doubts on the Forum
Circuit Diagram
PC Screenshot
For more Detail: Bluetooth Based Smart Home using atmega8 microcontroller
Related Posts / Projects -
Unitrend UT61E Ethernet Adapter with ATmega and ENC28J60Video tutorial on how I built an Ethernet adapter for the Unitrend UT61-E optical interface using an ATmega8 together with the Microchip ENC28J60.
Printed circuit board 'Multiuse tiny1' using ATmega8Project overview This small PCB, which I named Multiuse tiny1 was originally designed to convert NES/SNES controllers to USB. Since there is not a lot of space availabe inside an SNES controller, I designed the PCB to be as small as necessary. The PCB ... 
Simple USB AVR programmer, USBasp using ATMega8 microcontrollerUSBasp is low cost USB in-circuit programmer for Atmel AVR micontrollers. The hardware consists of an ATMega88 or an ATMega8 and a couple of passive components. The programmer uses a firmware-only USB driver, no special USB controller is needed. Its programming speed is up ... 
Monochrome Composite Video using Atmega8This article describes the design of a Text on TV project. It takes serial data and displays text on a TV screen. The hardware part of this project is pretty simple. It uses an Atmega8 microcontroller that runs with a 16 MHz crystal. The ... This free embedded project also found using:
- bluetooth circuit diagram
- atmega8 bluetooth
- bluetooth circuit
- avr bluetooth
- smart home
- smart home project
- bluetooth home automation circuit diagram
- atmega8 based projects
- smart home using microcontroller
- bluetooth circuits
Related Posts
-
DigiThermo 0-100.0 °C using AT89C4051
Posted on May 1, 2013
-
Clock ControllerV1.1 using AT89C2051
Posted on Apr 30, 2013
-
How LCDs Work
Posted on Apr 30, 2013
-
Night Light Saver V5.0 using AT89C2051
Posted on Apr 29, 2013
Tags
Share This
Want today's best stories? Follow us on Twitter!
(@MCU_Electronics)
send me the code for interfacing the atmega8 uart port to the bluesmirf plz..