You Are Here: Home » AVR ATmega Projects » LED Projects (Page 2)

Taiko Trainer

High level Design Overview/Rationale This idea was inspired by team member Gabriel Soares who is part of Cornell’s Taiko Drum Club (Yamatai). Through his practicing and performing with others, he recognized the opportunity to design a drum trainer that can help students better learn to perform their drumming when following the leader of the group and practicing with others. This device would provide them ...

Read more

wozItDo: Tiny IQ puzzel, BIG challenge

Hardware components: Atmel ATTiny85 × 1 LED (generic) × 3 Resistor 221 ohm Or similar, I used 220 ohm × 3 SparkFun Pushbutton switch 12mm or similar × 1 Coin Cell Battery Holder × 1 Coin Cell Battery CR2032 any 3v cell that fits is fine × 1 Hand tools and fabrication machines: Soldering iron (generic) Story I think of this puzzle as the electronic equivalent of those annoying "IQ" puzzles (e.g. where you ha ...

Read more

Yet Another Z180 (YAZ180) Project

I’m thinking about a new project, something a little unusual but still with a rich history of information upon which to base the build. On Tindie, I found the RC2014 project which is a build of a Z80 platform but based on some modern components. That got me thinking. My next project must be a Z80 based project. Why the Z80? Well, it was at one stage the most used CPU in the world, which leads to the great d ...

Read more

ATmega32 Switch Toggle Program

ATMega32 switch code is extremely simple to implement, and this article looks into how to write the code to make an LED light up when a switch is pressed. The atmega32-switch-code.c program tests the switch input to the ATMega32 Development System. There are many ways to write the code, but I have chosen the simplest way possible so everyone can understand. Therefore, instead of using “case”, I am using “if ...

Read more

ATmega32 blinking LED Lights

Using the ATMega32 microcontroller to flash or blink some LEDs is extremely simple and this tutorial shows how to make a blinker circuit including the example program code to blink eight LEDs. In this tutorial, you will learn how to make a program to blink eight LEDs sequentially, how to generate the hex file in AVR Studio, and how to transfer it into the ATMega32 memory using PonyProg2000. This is a multi- ...

Read more

Token number display system using microcontroller

Bank token number display project is build using ATmega8 Microcontroller and ULN2003 for driving large LED display, PCB layout, Circuit diagram are self explanatory. It is capable to display three digits, its simple project using microcontroller. Token issue systems are ideal for banks, airports, public dealing offices, hospitals,doctor’s clinics, restaurants and other such places where people have to wait ...

Read more

The LED Chasing Effect Project using Atmel AVR Microcontroller

One of the interesting projects for most of the embedded beginners enthusiasts or hobbyists is to build the LED chasing effect. In this project we are going to use both the Arduino IDE and Atmel AVR Studio to program the AVR ATMega168 microcontroller, therefore you could learn to use these well known Integrated Development Environment (IDE) to program the project. The LED Chasing Project To complete the pro ...

Read more
Scroll to top