You Are Here: Home » Blog » News » CDM Now Offers Flexible, Phase Stable Cable Assemblies for Applications Requiring Low Phase Change with Temperature

CDM Now Offers Flexible, Phase Stable Cable Assemblies for Applications Requiring Low Phase Change with Temperature




Turnersville, NJ (PRWEB) October 8, 2006

CDM Electronics, a leading distributor of commercial and military (MIL-SPEC) interconnect products, and premier provider of value-added contract manufacturing services, is now offering phase stable cable assemblies utilizing Times Microwaves Systems PhaseTrack -210 cables with TF4 dielectric technology. This proprietary dielectric is a flouropolymer material process developed specifically for employment in RF and microwave applications requiring an extremely linear phase-temperature characteristic while addressing system designers demands for flexible cable. Notably, the cables boast phase change with temperature of less than 1.5 ppm/degrees C (-55 degrees C to +85 degrees C), and will not develop a Teflon knee as they do not undergo the change in dielectric constant and abrupt change in electrical length that LD-PTFE (low-density Polytetroflourethelene) cables experience at normal room ambient (approximately +18 degrees C/+65 degrees F) conditions. As they additionally withstand repeated flexure while remaining within very tight electrical specifications, the assemblies are a superior alternative to LD- PTFE, SiO2 (Silicon Dioxide), or other conventional cables.




Ideal for use by engineers designing high-performance systems, CDMs phase stable cable assemblies may be confidently specified for deployment in a broad range of system platforms including ground, sea, and aerospace. They are singularly well suited for use in any mission critical application where temperature is fluctuating. Among the most common applications are satellite and military aircraft, phased array antenna systems, system interconnects and test and measurement environments.

Featuring triple shield construction to provide shielding effectiveness of better than -100 dB, the cables outside diameter measures 0.210 (5.3 mm). Further, the 50-ohm impedance cables have a minimum bend radius of 1.00 (25.4 mm). They typically measure 0.14 dB per foot at 2 GHz, 0.39 dB per foot at 10 GHz, 0.59 dB per foot at 18 GHz, and yield a low 1.35:1 VSWR. Phase stability with bending is 1 degree at 18 GHz. Their operating voltage is 2500 V (1000 V with SMA connectors), whereas cables operating temperature range is -55 degrees C to +125 degrees C.

CDM provides both standard and custom phase stable cable assemblies with a broad range of cable lengths and connector interfaces including , N, MUHF, F, BNC, 716DIN, TNC, SMA, UHF QDS (quick disconnect), reverse polarity, and QMA. To learn more about CDMs phase stable cable assemblies featuring PhaseTrack-210 cables with TF4 dielectric technology, visit http://www.CdmElectronics.com.

Pricing for CDMs phase stable cable assemblies start at $ 75.00 each; delivery is same day to 1 week.

PhaseTrack-210 and TF4 are trademarks of Times Microwave Systems.

Teflon is a trademark of Du Pont

About CDM

CDM Electronics, Inc. is an authorized, stocking distributor of full lines of high-quality relay sockets and circular, printed circuit, rack and panel, RF, and audio communications connectors. Serving world leaders in the military, aerospace, industrial, medical and telecommunications industries, the Company additionally employs state-of-the industry documented and controlled systems in its value-added contract manufacturer division which specializes in mission-critical cable assemblies. CDM is certified to ISO 9001:2000. For information on CDM and its services, visit http://www.CdmElectronics.com.

About Times Microwave Systems (TMS)

Times Microwave Systems has over 50 years experience in the design and manufacture of high performance flexible and semi-rigid coaxial cable, connectors, and cable assemblies for RF transmission from HF through microwave frequencies. An engineering oriented organization, the Company is committed to continuous improvement with respect to ISO-9001 Quality Standards and ISO-14001 Environmental Management Systems. Information on TMS is available at http://www.timesmicrowave.com.

CDM Electronics, Inc.

130 American Blvd.

Turnersville, NJ 08012

Phone: 877/386-8200; Fax: 856/740-0500

http://www.CdmElectronics.com

Contact: Carmen DeLeo, Jr.

###



Leave a Comment

You must be logged in to post a comment.

Read previous post:
Euroquartz to Launch Wide Range Of New Frequency Control Products at Electronica 2006

(PRWEB) October 9, 2006 Frequency control specialist, Euroquartz is launching a wide range of new products at Electronica 2006 (14...

Close
Scroll to top