You Are Here: Home » AVR ATmega Projects » EPROM adapter for ATMEL 89 Series Flash Microcontroller Programmer Ver 2.0

EPROM adapter for ATMEL 89 Series Flash Microcontroller Programmer Ver 2.0







Devices

The EEprom programmer software supports the following devices.

28C16 28C256 28C17 29C256 28C64

Hardware

Diode D1 and resistor R1 provide the VDD isolation when programming the 24 pin devices. The jumper J3 must be shorted for 24 pin devices, and open circuit for 28 pin device programming. Following EEPROMs are pin compatible with their EPROMs version,

28C16 —> 2716

28C64 —> 2764

29C256 —> 27256

The software for this adapter is located here: http://chaokhun.kmitl.ac.th/~kswichit/E2RomPgm_web/PgmE2w.zip

Schematic

EPROM Schematic

Download above in pdf (198KB)

For more detail: EPROM adapter for ATMEL 89 Series Flash Microcontroller Programmer Ver 2.0

About The Author

Number of Entries : 6710

Leave a Comment

You must be logged in to post a comment.

Read previous post:
The AVR microcontroller and embedded systems: using Assembly and C – AVR E-Book

The AVR Microcontroller and Embedded Systems: Using Assembly and C features a step-by-step approach in covering both Assembly and C...

Close
Scroll to top