Research and Markets : Who Is Going to Lead the Printable Electronics Space?

Dublin (PRWEB) August 5, 2005

Research and Markets (http://www.researchandmarkets.com/reports/c21885) has announced the addition of Printable Electronics: Roadmaps, Markets and Opportunities to their offering

 

Printable electronics — the use of low-cost, high-speed printing technologies to create electronic circuits and devices — promises to change the economics of the electronics industry and to create new kinds of products. According to its backers, the emergence of high-resolution ink-jet printers and semiconductor inks will enable the some segments electronics industry to transition from an environment in which electronics manufacturing plants are escalating in cost at an exponential rate to one in which production costs are modest and small, highly customized runs are economically feasible. At the same time the expectations are that low production and material costs and the ability to print onto flexible substrates will lead to a new generation of electronics products ranging from throwaway RFID tags to wall coverings with embedded photovoltaic cells or sensors.

 

This report provides a critical analysis of this vision and an in-depth analysis of the value proposition that printable electronics brings to the table. It includes a segmentation and eight-year forecast of the market by application and technology, along with commentaries of how firms are succeeding in this space today. In addition, the report answers such questions as:

 

Is ink-jet printed electronics ready for prime time? (There are significantly different opinions on this in the industry.) What have been its challenges and triumphs?

Where will printable electronics generate new business revenues in the next eight years? What are the low-hanging fruit and where are sustainable profits to be found? Printable electronics experts talk about a wide variety of new products — smart packaging, membrane keyboards, flexible displays, electronic signage, photovoltaic panels, etc. What is real and what is not? When will these products arrive on the market?

Who are going to be the leaders in the printable electronics space? Giant firms such as 3M, DuPont and Dow are already strongly committed to this space. And several specialist firms have already done IPOs. Who will be ultimate winners and losers . . . and why?

What type of equipment will be used? While the buzz is all about ink-jet there are a number of other printing technologies that will be used in the printable electronics arena. These include nanoimprint lithography, offset lithography and flexographic printing. This report will compare and contrast technologies.

In what areas will printable electronics firms prove a threat to the existing electronics industry and how will traditional firms adapt?

This report will be essential reading to business strategists, marketing and business development executives, product managers and technologists within electronics companies, specialty chemical and materials firms, printing and printing equipment companies, and electronic manufacturing equipment firms. It is also designed for investment banks, venture capitalists and internal investment teams that are looking at investments in printable electronics. The report will be based on an extensive interview program that will cover the entire value chain — including manufacturers of printing equipment and inks and of the printed devices themselves.

 

Contents are entitled as follows:

 

Introduction

 

Chapter Two: The Technology of Printable Electronics

 

Printing technology for printable electronics

Materials for printable electronics

Chapter Three: New Products Enabled by Printable Electronics and Why they Will Succeed or Fail in the Market

Thin-film transistors

Displays and “electronic paper”

Signage and smart shelves

Membrane keyboards

Photovoltaic panels

Sensor arrays

RFID tags and smart packaging

Lighting products

Printable fuel cells and batteries

Audio products

Antennas

Future products

Chapter Four Market Forecasts

Revenues by type of product

Revenues by end-user segment

Revenues by type of printing technology/material

For more information visit http://www.researchandmarkets.com/reports/c21885

 

Laura Wood

 

Senior Manager

 

Research and Markets

 

Fax: +353 1 4100 980

 

###


Related Electronic Circuit Press Releases


About The Author

Ibrar Ayyub

I am an experienced technical writer holding a Master's degree in computer science from BZU Multan, Pakistan University. With a background spanning various industries, particularly in home automation and engineering, I have honed my skills in crafting clear and concise content. Proficient in leveraging infographics and diagrams, I strive to simplify complex concepts for readers. My strength lies in thorough research and presenting information in a structured and logical format.

Follow Us:
LinkedinTwitter

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top