ADI’s

ADIs New EMS Division Offers a Complete Turnkey SMT and THT Production Solution

Leave a Comment / News /

Randolph, NJ (PRWEB) April 27, 2006 ADI American Distributors Inc., a single-source provider of manufacturing services for the high-technology electronics industry, and an ISO-9002/AS9120 distributor of electronic and electromechanical components and assemblies, announced the formation of the EMS (Electronics Manufacturing Services) division. Located in Randolph, NJ, the new AS9100-certified division is a fully integrated turnkey […]

ADIs New EMS Division Offers a Complete Turnkey SMT and THT Production Solution Read More »

Analog Devices’ High Performance Output Drivers Increase Efficiency of Industrial and Process Control Systems : ADI’s new output drivers offer best-in-class performance with industry’s highest level of accuracy and diagnostic capability.

Leave a Comment / News /

NORWOOD, Mass. (PRWEB) May 12, 2008 Designed to meet the growing demand for highly configurable industrial automation controllers, the new output drivers offer extensive diagnostic functionality such as fault detection and enhanced sensing capabilities that make system startup and troubleshooting easier. Integrating user-programmable current- and voltage-output capabilities, the AD5750 and AD5751 output drivers are ideally

Analog Devices’ High Performance Output Drivers Increase Efficiency of Industrial and Process Control Systems : ADI’s new output drivers offer best-in-class performance with industry’s highest level of accuracy and diagnostic capability. Read More »

Analog Devices’ Inertial Sensor Reduces Cost and Complexity of Industrial Motion Control Designs : – ADI’s ADIS16365 sensor offers 50 percent better bias stability and 20 percent more power efficiency, while reducing implementation time for high-end navigation systems by up to one year.

Leave a Comment / News /

NORWOOD, Mass. (PRWEB) June 9, 2008 Improved GPS Navigation   The ADIS16365 can be used anywhere high-performance motion control and feedback is required. In vehicles that rely on GPS satellite navigation to maintain accurate position information, such as high-end agricultural equipment, the IMU enhances their performance by immediately detecting small shifts in the position of

Analog Devices’ Inertial Sensor Reduces Cost and Complexity of Industrial Motion Control Designs : – ADI’s ADIS16365 sensor offers 50 percent better bias stability and 20 percent more power efficiency, while reducing implementation time for high-end navigation systems by up to one year. Read More »

Analog Devices’ RF Power Detection Technology Raises Performance Threshold for Cell Phones and Wireless Base Stations : ADI’s ADL5502 crest-factor RF power detection IC enables cell phone designers to extend battery life and better process complex 3G and 4G signals, while the ADL5513 logarithmic amplifier delivers a wider range of power level detection and control for Tx/Rx designs.

Leave a Comment / News /

NORWOOD, Mass. (PRWEB) June 16, 2008 Crest-Factor RF Detector Extends Cell Phone Battery Life by 20 Percent   The ADL5502 is the industry’s first dual-function RF detector in a single package that combines an RMS detector with an envelope detector to facilitate the crest-factor measurement of complex signals. Accurate power measurement and crest-factor calculation allows

Analog Devices’ RF Power Detection Technology Raises Performance Threshold for Cell Phones and Wireless Base Stations : ADI’s ADL5502 crest-factor RF power detection IC enables cell phone designers to extend battery life and better process complex 3G and 4G signals, while the ADL5513 logarithmic amplifier delivers a wider range of power level detection and control for Tx/Rx designs. Read More »

Analog Devices Sigma-Delta Converter is Unmatched in Speed and Resolution for Precision Sensing : -ADI’s AD7190 24-bit sigma-delta analog-to-digital converter delivers 7 nV noise and greater than 16-bits noise-free resolution up to 2.4 kHz; also features on-board programmable gain amp.

Leave a Comment / News /

NORWOOD, Mass. (PRWEB) June 30, 2008 This level of performance allows designers to measure much smaller signals faster and with greater accuracy, which can significantly improve system performance for precision instruments, such as weigh scales, process measurement and control modules, scientific instrumentation and medical monitoring devices. Additionally, designers can achieve an industry-leading 21-bit noise-free resolution

Analog Devices Sigma-Delta Converter is Unmatched in Speed and Resolution for Precision Sensing : -ADI’s AD7190 24-bit sigma-delta analog-to-digital converter delivers 7 nV noise and greater than 16-bits noise-free resolution up to 2.4 kHz; also features on-board programmable gain amp. Read More »

Analog Devices Maximizes Image Quality and Power Performance Across Multiple Ultrasound Platforms : – Leveraging ADI’s data conversion technology and expertise, expanded family of ultrasound solutions maximizes image quality and reduces power consumption in cart-based and battery-powered portable ultrasound equipment.

Leave a Comment / News /

NORWOOD, Mass. (PRWEB) September 8, 2008 These devices follow the award-winning AD9271, which when unveiled in April 2007, was the first device to integrate a complete octal ultrasound receiver on a single chip, and is used today in ultrasound equipment throughout the world. The AD927x offerings replace previous discrete solutions with a single integrated circuit

Analog Devices Maximizes Image Quality and Power Performance Across Multiple Ultrasound Platforms : – Leveraging ADI’s data conversion technology and expertise, expanded family of ultrasound solutions maximizes image quality and reduces power consumption in cart-based and battery-powered portable ultrasound equipment. Read More »

Analog Devices Unveils Op Amp with Over-Voltage Protection for Industrial Process Controls : ADI’s ADA4091-2 dual rail-to-rail op amp delivers industry’s best combination of low offset, low offset drift and wide gain-bandwidth across a variety of sensor inputs, while over-voltage protection circuitry prevents phase-inversion errors.

Leave a Comment / News /

NORWOOD, Mass. (PRWEB) September 19, 2008 “Industrial amplifiers are subject to fault voltages from a variety of sources, including electro-magnetic interference, damaged cabling, lightning strikes and other disturbances on the power grid, incorrect hookups to other system components and power-line surges when power to the system is restored after routine service or equipment upgrades,” said

Analog Devices Unveils Op Amp with Over-Voltage Protection for Industrial Process Controls : ADI’s ADA4091-2 dual rail-to-rail op amp delivers industry’s best combination of low offset, low offset drift and wide gain-bandwidth across a variety of sensor inputs, while over-voltage protection circuitry prevents phase-inversion errors. Read More »

Analog Devices’ MEMS-Based Industrial Vibration Sensor Receives Prestigious Golden Mousetrap Award from Design News Magazine : ADI’s ADXL001 sensor takes top honors in the Test & Measurement category as the first sensor to provide reliable system failure warning while meeting the cost criteria of industrial applications.

Leave a Comment / News /

NORWOOD, Mass. (PRWEB) September 22, 2008 “Our Golden Mousetrap Awards give innovators the recognition they justly deserve, said John Dodge, editor-in-chief, Design News. “We extend our sincerest congratulations to the winners and finalists.”   For more than 20 years, Design News has recognized the most significant individual and corporate technical achievements in the electronics community.

Analog Devices’ MEMS-Based Industrial Vibration Sensor Receives Prestigious Golden Mousetrap Award from Design News Magazine : ADI’s ADXL001 sensor takes top honors in the Test & Measurement category as the first sensor to provide reliable system failure warning while meeting the cost criteria of industrial applications. Read More »

Analog Devices’ Linear Regulator Family, Optimized for Noise-Sensitive Portable Applications, is Available in the Industry’s Smallest Package : ADI’s new ADP120, ADP121 and ADP130 LDOs deliver the right balance of excellent noise performance and very low quiescent current, allowing mobile electronics designers to quickly and cost-effectively distribute clean power rails to noise-sensitive systems.

Leave a Comment / News /

NORWOOD, Mass. (PRWEB) September 25, 2008 “Low-power and low-noise operation are key design challenges for mobile device designers being tasked with adding new features and functions into power-sensitive consumer, industrial and medical devices,” said Arcadio Leon, marketing director for portable power products, Analog Devices. “Part of ADI’s growing portfolio of power management solutions, the ADP120,

Analog Devices’ Linear Regulator Family, Optimized for Noise-Sensitive Portable Applications, is Available in the Industry’s Smallest Package : ADI’s new ADP120, ADP121 and ADP130 LDOs deliver the right balance of excellent noise performance and very low quiescent current, allowing mobile electronics designers to quickly and cost-effectively distribute clean power rails to noise-sensitive systems. Read More »

Analog Devices’ Audio Codecs Offer the Industry’s Best Audio Experience, Lowest Power Dissipation : – ADI’s ADAU1361 low-power stereo audio codec leads the industry in audio performance at lowest dissipated power, while the ADAU1761 adds support for ADI’s audio algorithm suite or licensed third party algorithms.

Leave a Comment / News /

SAN FRANCISCO (PRWEB) October 2, 2008 The ADAU1361 and ADAU1761 audio codecs include stereo audio ADCs (analog-to-digital converters) and DACs (digital-to-analog converters) that support sample rates from 8 kHz to 96 kHz, and a digital volume control. The analog input stage supports a stereo line input, a stereo analog microphone interface and a circuit to

Analog Devices’ Audio Codecs Offer the Industry’s Best Audio Experience, Lowest Power Dissipation : – ADI’s ADAU1361 low-power stereo audio codec leads the industry in audio performance at lowest dissipated power, while the ADAU1761 adds support for ADI’s audio algorithm suite or licensed third party algorithms. Read More »

Scroll to Top