The presented project is a function generator for sinusoidal and square signals production. The output frequency covers the range from 10 Hz to 100 KHz with a step of 2 Hz. The waveform synthesis… Electronics Projects, AT90S1200 D.D.S. Function Generator “avr project, microcontroller projects, “ The presented project is a function generator for sinusoidal and square signals production. The […]
AT90S1200 D.D.S. FUNCTION GENERATOR Read More »
Download auto-zero assembly code This broadband probe has a small antenna (about a 15 cm length of insulated wire). Radio Frequency energy coupled to the antenna is detected and made available to drive millivolt level signals to the input of a DVM (Digital Volt Meter). Its battery powered for convenience with very low current drain
Broadband RF Field Strength Probe using Atmel AT90S1200A AVR controller Read More »
Pinning LCD display 1601A: Pin no. Symbol Function 1 Vss GND 2 Vdd + 5V 3 Vo Contrast Adjustment 4 RS H/L Register select signal 5 RW H/L Read/write signal 6 E H->L Enable signal 7 DB0 H/L Data bus line 8 DB1 H/L Data bus line 9 DB2 H/L Data bus line 10 DB3
Pinning LCD display 1601 using microcontroller Read More »
Description With this small board you can program most of the AVR ATTiny microcontrollers or you can build your projects to use it in a stand alone application. It can be powered with a 9V battery because it has 5V voltage regulator on it. The voltage regulator can give 1000mA current. The power to the
ATTiny Board For AVR ATTiny microcontrollers Read More »
