atmega8515

A serial interface for the Truly MTC-C162DPLY-2N using ATmega8515

The 10k potentiometer, just above the ISP connector near the lower middle of the board,is used to adjust the display contrast according to your vertical viewing angle. DOWNLOADS ATTINY2313/AT90S2313 AVRStudio assembler source, LDCbutons040904Ca.htm ATTINY2313/AT90S2313 AVRStudio assembler source, UPDATED FOR COMPATIBILITY WITH NEWER VERSIONS OF THE ASSEMBLER, LDCbutons040904C_updated_a.htm Truly LCD driver include file, 2x16lcdinc.htm tlcd309Ba.htm AT90S8515/ATMega8515 […]

A serial interface for the Truly MTC-C162DPLY-2N using ATmega8515 Read More »

A 1 Khz Digital Sine Wave Signal Source using ATmega8515 microcontroller

A 1 Khz Digital Sine Wave Signal Source using ATmega8515 microcontroller

1 Khz From a Quartz Crystal 1 V P-P Sine Wave Calibrated Output 1 KHz Square Wave Output 900 mv Inverted Sine Wave Output (Uncalibrated) Downloads Download the WINAVR main source for the 2313 version of the firmware: 2313sine.c. Download the complete zipped WINAVR project for the  2313 version of the firmware: 1_kHz_sine_2313.zip. Also, Download

A 1 Khz Digital Sine Wave Signal Source using ATmega8515 microcontroller Read More »

Serial interface with 2X16 LCD display using ATMega8515 microcontroller

The 10k potentiometer, just above the ISP connector near the lower middle of the board, is used to adjust the display contrast according to your vertical viewing angle. DOWNLOADS ATTINY2313/AT90S2313 AVRStudio assembler source. LDCbutons040904Ca.htm ATTINY2313/AT90S2313 AVRStudio assembler source. UPDATED FOR COMPATIBILITY WITH NEWER VERSIONS OF THE ASSEMBLER. LDCbutons040904C_updated_a.htm Truly LCD driver include file.  2x16lcdinc.htm tlcd309Ba.htm

Serial interface with 2X16 LCD display using ATMega8515 microcontroller Read More »

DS1820 Temperature Controller using atmega8515 microcontroller

This project displays the temperature on an LCD display with an resolution of 0.06degrees. DS1820 is used for sensing the temperature. It can measure temperature range from -55deg to +125deg. But i take care of only the possitive temperature. There are 3 switches to change the alarm temperature, the user can increment the Alarm temperature

DS1820 Temperature Controller using atmega8515 microcontroller Read More »

8×8 Dotmatrix Scrolling LED display using atmega8515 microcontroller

Here’s an another project, which makes an Scrolling LED display. Here 64 leds which are connected to an Matrix display. The Anodes are drived through an Driver IC UDN2981 and the cathodes are drived through ULN2803. The Atmega8515 is used in this project to control the display. The microcontroller is programmed with Bascom AVR. Circuit

8×8 Dotmatrix Scrolling LED display using atmega8515 microcontroller Read More »

Ultrasonic range finder using ATMega8515

This project is used to measure the distance using ultrasonic sensors. The ultrasonic signal passes through the atmosphere to a barrier, which we want to measure the distance. Part of this signal is reflected and travels back to the receiver. The time delay between sending and receiving signals are then determined by distance barriers. The

Ultrasonic range finder using ATMega8515 Read More »

Scroll to Top