ds1621

VOLTMETER THERMOMETER

89C51 8051 VOLTMETER THERMOMETER DS1621 ADC0808

Leave a Comment / Metering - Instrument Projects /

ADC 0808 standard data acquisition systems many components on a single chip host is a member of ADC 0808 8-bit flip makes the process and addresses from input latch 8-channel data selection (multiplexer) and…Electronics Projects, 89C51 8051 voltmeter thermometer DS1621 ADC0808 “8051 example, avr project, keil example, microcontroller projects, “ ADC 0808 standard data acquisition systems many components […]

89C51 8051 VOLTMETER THERMOMETER DS1621 ADC0808 Read More »

THERMOMETER CIRCUIT SCHEMATIC 12

AT89C51 DS1621 THERMOMETER CIRCUIT

Leave a Comment / Temperature Measurement Projects /

AT89C51 Operation of the thermometer circuit DS1621 temperature sensor circuit using a digital thermometer will tell if I made . As a simple circuit operation is as follows; The numerical value obtained from the temperature… Electronics Projects, AT89C51 DS1621 Thermometer Circuit “8051 example, avr project, keil example, microcontroller projects, “ AT89C51 Operation of the thermometer circuit DS1621 temperature sensor

AT89C51 DS1621 THERMOMETER CIRCUIT Read More »

PC Thermometer Using ATTiny2313

Leave a Comment / AVR ATmega Projects, Temperature Measurement Projects /

Description With this project you can show the temperature on you PC. This thermometer plugs in on any free serial port. It gives temperature readings accurate to 0.5°C with no calibration.The project consists of the ATTiny2313 RS232 Project board and the DS1621 Thermometer board and software for the PC. It can display both indoor and

PC Thermometer Using ATTiny2313 Read More »

Thermometer using DS1621 and Nokia 3310 LCD interfaced with ATmega8

Leave a Comment / AVR ATmega Projects, Interfacing(USB - RS232 - I2c -ISP) Projects, Temperature Measurement Projects /

I am presenting one application with the Nokia 3310 LCD: Designing a thermometer using DS1621 temperature sensor IC. DS1621 is 8-pin sensor from Maxim, with temp range of -55 to +125 degree C, which can be interfaced with microcontroller over two-wire serial i2c bus. It has operating voltage range from 2.7 to 5.5v. I’m operating

Thermometer using DS1621 and Nokia 3310 LCD interfaced with ATmega8 Read More »

Scroll to Top