You Are Here: Home » Posts tagged "hex" (Page 20)

My own AVR ISP programmer using PIC16f877a and python!

Introduction: (don't skip to read the note below) I recently purchased few AVR microcontrollers. I don't know much about AVR since I am using it for first time. Any way, I have some experience on working with PIC and MSP430. To program AVR using USB, I came to know that USBASP is the best and cheap choice. But any way, I thought of making my own ISP programmer (both PC software and burning hardware) for AVR ...

Read more

4×4 Matrix Key-board Interfacing with ATmega32

Here is a project for beginners to interface a 16-key (4x4) keypad with ATmega32 using 8-pins i.e. one port of the microcontroller. This is useful particularly where we need more keys but don't want to spend more uC pins for interfacing. The 4x4 keypad is a standard one available in the market. I've used here one from my earlier project. The LED shown in the schematic is just extra, which can be used anyway ...

Read more

NOKIA 3310 LCD interfacing with ATmega8

Using graphic LCD in a project gives it really a good look and flexibility of displaying different characters and shapes. But, the graphic LCDs are quite costly. The NOKIA 3310 LCD provides a really low-cost solution to add a small graphic display into your project and also good for learning purpose. The LCD is SPI bus compatible, saving many pins for other uses. It operates at 3.3v.Here is a small circuit ...

Read more

TV remote controller 160KHz High Quality Stereo MMC WAV player using ATMEGA32

Introduction: This is my first AVR based hobby project and the most successful one compared to my all previous stuff. I am 100% satisfied with this work. Few months ago, I tried to make a wav player using a PIC16F877A. It worked anyway, but the audio quality was not so good for higher sampling rate because that chip doens't have enough ram and thus I couldn't implement a good data buffer. But when I bought ...

Read more

Generating AUDIO ECHO using Atmega32 microcontroller

Introduction: But now I can do this very easily by a simple digital signal processing using a microcontroller. It's concept is very simple, ie we need to apply a proper delayed feedback in digital samples with in a circular buffer. I did this using an atmega32 microcontroller and it worked fine. This is simple but really an interesting project. Not only an echo, but we can do a lot of fun with this type of ...

Read more

Implementing Discrete Fourier Transform in Atmega32 to make an audio spectrum analyzer

"All waveforms, no matter what you scribble or observe in the universe, are actually just the sum of simple sinusoids of different frequencies." Hi, I am just refreshing the basics of fourier transform. I am not an expert. Now I did a small audio spectrum analyzer(0 - 10KHz) on a 16x2 character lcd using an atmega32 microcontroller. Since I am refreshing from the basics, so I started with simple DFT. Also, ...

Read more
Scroll to top