I have seen plenty of Instructables showing how to work with microprocessors, but they all assume that you have worked with them before and know what you are doing. I have not seen an Instructable that takes you from nothing and builds on each step. What we will do here is to start with a […]
Getting Started with Atmel AVR and BASCOM using attiny26 microcontroller Read More »
This instructable is a crash course in how to use some of the features of the Dragon Rider 500 from Ecros Technologies. Please be aware that there is a very detailed User’s Guide available on the Ecros website. The Dragon Rider is a interface board for use with an AVR microcontroller programmer called the AVR
How to use the Dragon Rider 500 with your AVR Dragon using ATtiny2313 microcontroller Read More »
If you are just getting into microcontrollers there’s alot to know as you have likely found out. There’s alot of good online tutorials for the Atmel AVR’s and chances are you have see a few of those by now. I recently got into microcontrollers and didn’t know jack about it. I wanted to have some
How to control a 16×2 LCD using an AVR ATtiny2313 Read More »
This Instructable will show you how to build your own Web Connected Robot (using an Arduino micro-controller and Asus eee pc). Why would you want a Web Connected Robot? To play with of course. Drive your robot from across the room or across the country, using nothing more than Skype and a web browser (nothing
Make a Web Connected Robot (for about $500) (using an Arduino and Netbook) Read More »
Hi techies!! This is one more of my circuits, interfacing ATmega32 with an LCD and a DAC. it also includes two general purpose push-buttons and In System Programming connector. The controller is operating with 14.7456 MHz frequency crystal, convenient for generating standard baud rates (for RS422 communication whic i used in my actual project, not
Interfacing ATmega32 with an LCD and a DAC Read More »
A while back the instructables robot made a post on Facebook about some guys who played pong on an Arduino (http://wayneandlayne.com/projects/video-game-shield/games/#pong) but after looking around, i saw that everyone who did this was only worried about making it work. and often resulted as a very hard to use system with only potentiometers to use as controllers.
Ardu-pong! the Arduino based pong console Read More »
I’ve always been interested in monitoring my local weather, and noticed the difference between what weather.com and accuweather.com think my local weather is, and what I see out the window. I also wanted better control over my heating and A/C system. As a computer and electronics nut, I’ve been playing with the Arduino Microcontroller, and
The Arduino Weather Station / Thermostat using ATmega328 microcontroller Read More »
On this instructable I will try to show how to interface a RFID sensor with the Arduino. I am using the RFID sensor from seeedstudio the serial version of it. There are a few parts you will gonna need. I also bought some RFID keys. UPDATE: Now it works with IDE 021 Step 1 What
How to connect Arduino and RFID Read More »
In this Instructable, I will step through controlling the temperature of most kitchen appliances. As an example, I will use an old Westbend Poppery popcorn maker (aka. coffee roaster), but these same techniques will be applicable to most hot plates, coffee makers, and waffle irons. This instructable puts you at risk of electrocuting or burning
Temperature Control For Kitchen Appliances Read More »
This Instructable will show you how to modify an Altoids tin for a wireless 2×16 character display. Using an Altoids tin was inspired by the need to have a small yet protective enclosure for a pair of Xbee modules recently bought from Sparkfun. I purchased the Xbee Pro modules with external antenna for the extended range
Wireless Altoids Display Read More »
