Motion

PARKER EXPANDS THERMAL INTERFACE MATERIALS OFFERING

PARKER EXPANDS THERMAL INTERFACE MATERIALS OFFERING

The Chomerics division of Parker Hannifin Corporation, the global leader in motion and control technologies, announced the launch of THERM-A-GAP GEL 75, a 7.5 W/m-K single component dispensable thermal interface material designed for high-performance applications. THERM-A-GAP GEL 75 is a single component, gel material best suited for today’s high-powered electronics applications. When applied to a heat-generating […]

PARKER EXPANDS THERMAL INTERFACE MATERIALS OFFERING Read More »

POWERFUL AND EXTREMELY MINIATURISED MOTION CONTROLLERS2

POWERFUL AND EXTREMELY MINIATURISED MOTION CONTROLLERS

With the new MC3001 motion controllers, available as MC 3001 B (board-to-board connectors) or MC3001P (28-pin plug connector), FAULHABER rounds out the MC V3.0 generation of controllers at the lower end of the performance spectrum. The controllers are extremely miniaturised and, with 1.4 amperes in continuous operation and up to 5 amperes peak current, are

POWERFUL AND EXTREMELY MINIATURISED MOTION CONTROLLERS Read More »

LSM6DSO – ALWAYS ON MOTION PROCESSING INEMO INERTIAL MEASUREMENT UNIT

LSM6DSO – ALWAYS-ON MOTION-PROCESSING INEMO INERTIAL MEASUREMENT UNIT

The LSM6DSO is a system-in-package featuring a 3D digital accelerometer and a 3D digital gyroscope boosting performance at 0.55 mA in high-performance mode and enabling always-on low-power features for an optimal motion experience for the consumer. The LSM6DSO supports main OS requirements, offering real, virtual and batch sensors with 9 kbytes for dynamic data batching. ST’s family

LSM6DSO – ALWAYS-ON MOTION-PROCESSING INEMO INERTIAL MEASUREMENT UNIT Read More »

Build a Motion Control Rig for Time-Lapse Photography

If you dig around in your camera’s settings long enough, you’re almost assured to find that it has a mode to create time-lapse videos — those magical, time compressing movies that can turn any hillside or street corner into a lightning-paced dreamscape. Time-lapse videos by themselves are easy enough to make, but if you do

Build a Motion Control Rig for Time-Lapse Photography Read More »

MEMS motion tracker features gyroscopes and full navigation engine

(PRWEB) August 11, 2004 The IMT6000, manufactured by http://www.imego.com of Sweden, is the first ultra light INS device able to track motion for 10 seconds with positional accuracy, in x,y,z coordinates, of a few centimeters and angular accuracy surpassing 0.3 degrees. The IMT6000 can track velocity during 20 seconds of motion to within 0.01 m/s.

MEMS motion tracker features gyroscopes and full navigation engine Read More »

2d3 Sensing Rolls Out Full Motion Video Storage and Dissemination Suite, Catalina

Irvine, CA (PRWEB) April 20, 2011 2d3 Sensing, a leading provider of vision science solutions for industrial, defense, and entertainment applications, announced the release of Catalina at the SPIE 2011 Defense and Security conference, April 25-29 in Orlando, Florida at booth #1524. Catalina is a server-side software solution that provides video storage and retrieval tools

2d3 Sensing Rolls Out Full Motion Video Storage and Dissemination Suite, Catalina Read More »

Analog Devices’ Inertial Sensor Reduces Cost and Complexity of Industrial Motion Control Designs : – ADI’s ADIS16365 sensor offers 50 percent better bias stability and 20 percent more power efficiency, while reducing implementation time for high-end navigation systems by up to one year.

NORWOOD, Mass. (PRWEB) June 9, 2008 Improved GPS Navigation   The ADIS16365 can be used anywhere high-performance motion control and feedback is required. In vehicles that rely on GPS satellite navigation to maintain accurate position information, such as high-end agricultural equipment, the IMU enhances their performance by immediately detecting small shifts in the position of

Analog Devices’ Inertial Sensor Reduces Cost and Complexity of Industrial Motion Control Designs : – ADI’s ADIS16365 sensor offers 50 percent better bias stability and 20 percent more power efficiency, while reducing implementation time for high-end navigation systems by up to one year. Read More »

Analog Devices’ Inertial Sensors Deliver Cost-Effective, Easy-To-Implement Motion Sensing for Industrial and Medical Instrumentation : – ADI expands inertial sensor portfolio with products that deliver unprecedented levels of system control and ease of integration at a fraction of the cost of competing offerings.

MUNICH, Germany (PRWEB) November 11, 2008 “Analog Devices’ iSensor intelligent sensor IMU portfolio has opened new markets and applications for advanced motion sensors,” said Bob Scannell, business development manager, iSensor intelligent sensor products, Analog Devices. “The ADIS16405, which offers pre-calibrated and pre-aligned inertial and magnetic sensors, greatly simplifies the process of implementing full IMU sensor

Analog Devices’ Inertial Sensors Deliver Cost-Effective, Easy-To-Implement Motion Sensing for Industrial and Medical Instrumentation : – ADI expands inertial sensor portfolio with products that deliver unprecedented levels of system control and ease of integration at a fraction of the cost of competing offerings. Read More »

InvenSense Showcases The Latest Motion Interface Innovations and Solutions at CES 2012

Sunnyvale, Calif. (PRWEB) January 03, 2012 InvenSense, Inc. (NYSE: INVN), the leading provider of MotionTracking devices for consumer electronics, will showcase the companys latest motion interface innovations for smartphones, tablets, game controllers, smart TVs, and wearable sensors at the CES 2012 tradeshow. InvenSense will also demonstrate the IDG-2020/IXZ-2020 family of gyroscopes which has been designed

InvenSense Showcases The Latest Motion Interface Innovations and Solutions at CES 2012 Read More »

TRINAMIC Teams with Actels SmartFusion Intelligent Mixed Signal FPGAs for Motion Control

San Jose, CA (PRWEB) April 28, 2010 Trinamic, the industry leader in embedded motion control systems, today announced its partnership with Actel Corporation (NASDAQ: ACTL) for complete motion-control systems. The two firms will combine the power and flexibility of Actels SmartFusionTM intelligent mixed signal FPGAs with Trinamics industry-leading driver ICs for stepper motors and brushless

TRINAMIC Teams with Actels SmartFusion Intelligent Mixed Signal FPGAs for Motion Control Read More »

Scroll to Top