Power

LOW POWER LCD CLOCK BASED ON AN AVR128DA48

LOW POWER LCD CLOCK BASED ON AN AVR128DA48

The Liquid Crystal Displays (LCDs) are a type of flat panel display that uses liquid crystals for operation. They are relatively old technology but can be seen in clocks, laptops, computers, calculators, dashboards, and other electronic projects and devices because of their advantages over newer types of displays, including low power, low cost, and readability. […]

LOW POWER LCD CLOCK BASED ON AN AVR128DA48 Read More »

EA W128064 XALG COMPACT LOW POWER OLED DISPLAY

EA W128064-XALG COMPACT LOW-POWER OLED DISPLAY

Display Visions’ 0.84″ 96 x 16 OLED display is ideal for small, compact low-power applications Display Visions’ yellow OLEDs come packaged as a complete module that includes all required logic at only a 1.34 mm thickness. With a built-in controller, 2000:1 contrast ratio, 10 Âµs response time, viewing angles greater than 160°, and the ability to withstand

EA W128064-XALG COMPACT LOW-POWER OLED DISPLAY Read More »

I had already taken it out e1667801277861

Networking

Board Design For part of my final project I want to make my own USB audio recording device. So I’ll try to develop all the necessary electronics this week. I have the analog circuitry I need from inputs week. But I don’t have a board ready to go with a USB-capable microcontroller (bit-banging will not suffice,

Networking Read More »

NEW LOW POWER GENERAL PURPOSE LATTICE FPGA FAMILY

NEW LOW-POWER, GENERAL-PURPOSE LATTICE FPGA FAMILY

Lattice Semiconductor has introduced a new general-purpose FPGA family that has been developed to combine high I/O density, low-power, small packages and fast interfaces. [via] The Lattice Certus-NX series provides up to double the I/O density per mm 2 of similar FPGAs, and provides power savings, a small footprint, reliability, and instant-on performance. Devices in the family support

NEW LOW-POWER, GENERAL-PURPOSE LATTICE FPGA FAMILY Read More »

BUILDING AN EXTREMELY HIGH POWERED 1 12V LAB POWER SUPPLY ON THE CHEAP 1

BUILDING AN EXTREMELY HIGH POWERED 1-12V LAB POWER SUPPLY ON THE CHEAP

For a number of years now I’ve had a couple of high powered switching power supply units made by Power-One. They’re typically found in I.T. equipment and provide a single output rail of either 12 V or 48 V with a very high current rating. The other cool thing is that in the case of

BUILDING AN EXTREMELY HIGH POWERED 1-12V LAB POWER SUPPLY ON THE CHEAP Read More »

PICOCORE MX8MM FEATURES I.MX8 MINI AND RUNS LINUX2

PICOCORE MX8MM FEATURES I.MX8 MINI AND RUNS LINUX

F&S Elektronik Systeme has unveiled its 40 x 35mm “PicoCore MX8MM” module which runs Linux on a quad-A53, 1.8GHz i.MX8 Mini with up to 8GB LPDDR4 and 32GB eMMC plus WiFi/BT, a GbE controller, PCIe, and optional -40 to 85°C support. The PicoCore MX8MM is a i.MX8M variant with lower video resolution, but a faster clock rate. The PicoCore MX8MM has the same

PICOCORE MX8MM FEATURES I.MX8 MINI AND RUNS LINUX Read More »

Scroll to Top