Precision

Precision programmable current source uses two ICs

This Design Idea mates a precision current source IC with precision difference amp chips to create a programmable current source or sink. The resistor-programmable current source/sink in Figure 1 illustrates the basic topology, taking advantage of tightly matched on-chip resistor ratios instead of relying on absolute tolerances. The IIN current source gives rise to a […]

Precision programmable current source uses two ICs Read More »

Current-sense amp integrates precision shunt resistor, in single package

Texas Instruments says it is making, “high-accuracy measurement more attainable with the first current-sense amplifier to integrate a high-precision, low-drift 2 mΩ shunt resistor,” – the device can cut calibration effort, system cost, and footprint for test and measurement, communications load monitoring, and power supplies. For highly accurate measurements over a wide temperature range, TI’s

Current-sense amp integrates precision shunt resistor, in single package Read More »

ESAB Introduces Precision Hole Technology for Plasma Cutting Machines

Florence, SC (PRWEB) April 30, 2011 ESAB Welding & Cutting Products introduces an important new capability for its CNC plasma cutting machines.   ESAB CNC plasma cutting machines are now available with Precision Hole Technology, an integrated set of systems that improve hole cutting cylindricity as well as delivering the highest possible edge quality. This

ESAB Introduces Precision Hole Technology for Plasma Cutting Machines Read More »

Fenner Precision Introduces the FHT Class of Synchronous Belts

Manheim, PA (PRWEB) February 5, 2008 Synchronous belts are generally preferred for conveying applications, especially paper propulsion, because they offer higher accuracy, lower maintenance and better performance at higher speeds. Traditionally, these belts have been made of rubber or a composite which doesn’t offer the level of tooth definition and precision necessary for many applications.

Fenner Precision Introduces the FHT Class of Synchronous Belts Read More »

Analog Devices Sigma-Delta Converter is Unmatched in Speed and Resolution for Precision Sensing : -ADI’s AD7190 24-bit sigma-delta analog-to-digital converter delivers 7 nV noise and greater than 16-bits noise-free resolution up to 2.4 kHz; also features on-board programmable gain amp.

NORWOOD, Mass. (PRWEB) June 30, 2008 This level of performance allows designers to measure much smaller signals faster and with greater accuracy, which can significantly improve system performance for precision instruments, such as weigh scales, process measurement and control modules, scientific instrumentation and medical monitoring devices. Additionally, designers can achieve an industry-leading 21-bit noise-free resolution

Analog Devices Sigma-Delta Converter is Unmatched in Speed and Resolution for Precision Sensing : -ADI’s AD7190 24-bit sigma-delta analog-to-digital converter delivers 7 nV noise and greater than 16-bits noise-free resolution up to 2.4 kHz; also features on-board programmable gain amp. Read More »

Analog Devices’ 16-Bit, 10-MSPS SAR Converter Surpasses Industry Performance Benchmark : – Medical imaging and data acquisition systems gain precision and throughput with PulSAR

NORWOOD, Mass. (PRWEB) June 30, 2008 ADI’s AD7626 PulSAR ADC achieves a new level of 16-bit data capture performance, with best-in-class 15-bit ENOB (effective number of bits) and 10-MSPS (million samples per second) throughput, which is 2.5 times faster than other SAR ADCs. Unlike other ADCs, which operate at much lower speeds or reach higher

Analog Devices’ 16-Bit, 10-MSPS SAR Converter Surpasses Industry Performance Benchmark : – Medical imaging and data acquisition systems gain precision and throughput with PulSAR Read More »

Ultra Precision Industrial Scales with New Technology Introduced By Arlyn Scales

East Rockaway, NY (PRWEB) July 26, 2008 Electronic Industrial Scales are among the most common instruments used throughout a variety of different industries. Industrial engineers and purchasers of electronic scales have two overriding characteristics that they must trade off in their purchasing decision; accuracy and cost. There have traditionally been two predominant technologies that are

Ultra Precision Industrial Scales with New Technology Introduced By Arlyn Scales Read More »

Analog Devices’ Amplifier Reduces Board Space and Complexity in Industrial and Instrumentation Equipment : – ADI’s AD8295 precision in amp front-end uses half the space of discrete solutions while providing the industry’s best common-mode rejection ratio of 80 dB to 8 kHz.

NORWOOD, Mass. (PRWEB) December 10, 2008 The AD8295 in amp delivers the highest common-mode rejection (CMR) over frequency in its class. The CMR of competing devices typically falls off at 200 Hz, while the AD8295 maintains a minimum CMR of 80 dB to 8 kHz for all grades at G = 1. High CMR over

Analog Devices’ Amplifier Reduces Board Space and Complexity in Industrial and Instrumentation Equipment : – ADI’s AD8295 precision in amp front-end uses half the space of discrete solutions while providing the industry’s best common-mode rejection ratio of 80 dB to 8 kHz. Read More »

OnChip Introduces Thin Film Precision Silicon Chip Resistors for Hi-Rel Applications

Santa Clara, CA (Vocus) February 4, 2009 A global leader in Integrated Passives Devices (IPD), OnChip today introduced a family of Thin Film Silicon wire-bondable Resistor Chips. These products use sophisticated thin-film manufacturing process featuring a high-stability, self-passivating and moisture-resistant Tantalum Nitride resistor element. Consisting of a single and dual value resistors, these chips offer

OnChip Introduces Thin Film Precision Silicon Chip Resistors for Hi-Rel Applications Read More »

Martel Announces Precision Digital Thermometer

Derry, NH (PRWEB) November 19, 2010 A new precision digital thermometer, the BetaProbe TI, is coming from Martel as a ready replacement for liquid-in-glass thermometry applications. With a total-cost-of-ownership far less than the traditional devices, the BetaProbe TI offers advantages in terms of reliability, precision, accuracy and ease of calibration. The BetaProbe circuit design

Martel Announces Precision Digital Thermometer Read More »

Scroll to Top