You Are Here: Home » AVR ATmega Projects » USB RFID Reading Keyboard using USnooBie

USB RFID Reading Keyboard using USnooBie




USnooBie RFID KeyboardKeyboardvideo USB RFID Reading Keyboard
Demo

 

This is a step by step tutorial on how to build a RFID tag reading USB keyboard using the USnooBie.

This tutorial is provided with the project files. The code files are heavily commented with references to relevant documentation.

Watch the two part videos below to see how to build and code this project. Please watch in full screen at 1280x720p resolution! Go to the direct links to the Youtube video below if you cannot activate HD 1280x720p resolution. There will be coding done on the screen so you need the HD resolution to see the code. The video shown above is only part 1, part 2 is linked below.

Project files: http://frank.circleofcurrent.com/files/usnoobie_rfid_keyboard.zip
Project resources: http://frank.circleofcurrent.com/usnoobie/downloads.php
More info on USnooBie:  http://frank.circleofcurrent.com/usnoobie/

Part 1: http://www.youtube.com/watch?v=IdGpSafJISI

Part 2: http://www.youtube.com/watch?v=poI58P0lQwY

For more Detail: USB RFID Reading Keyboard using USnooBie

Leave a Comment

You must be logged in to post a comment.

Read previous post:
hardware
New Jar of Fireflies

When I ran across the Jar of Fireflies Instructable sometime this past summer, I knew I had to build it.  Full credit to...

Close
Scroll to top