Sensor

Analog Devices Unveils Op Amp with Over-Voltage Protection for Industrial Process Controls : ADI’s ADA4091-2 dual rail-to-rail op amp delivers industry’s best combination of low offset, low offset drift and wide gain-bandwidth across a variety of sensor inputs, while over-voltage protection circuitry prevents phase-inversion errors.

Leave a Comment / News / Ibrar Ayyub

NORWOOD, Mass. (PRWEB) September 19, 2008 “Industrial amplifiers are subject to fault voltages from a variety of sources, including electro-magnetic interference, damaged cabling, lightning strikes and other disturbances on the power grid, incorrect hookups to other system components and power-line surges when power to the system is restored after routine service or equipment upgrades,” said […]

Analog Devices Unveils Op Amp with Over-Voltage Protection for Industrial Process Controls : ADI’s ADA4091-2 dual rail-to-rail op amp delivers industry’s best combination of low offset, low offset drift and wide gain-bandwidth across a variety of sensor inputs, while over-voltage protection circuitry prevents phase-inversion errors. Read More »

Analog Devices’ MEMS-Based Industrial Vibration Sensor Receives Prestigious Golden Mousetrap Award from Design News Magazine : ADI’s ADXL001 sensor takes top honors in the Test & Measurement category as the first sensor to provide reliable system failure warning while meeting the cost criteria of industrial applications.

Leave a Comment / News / Ibrar Ayyub

NORWOOD, Mass. (PRWEB) September 22, 2008 “Our Golden Mousetrap Awards give innovators the recognition they justly deserve, said John Dodge, editor-in-chief, Design News. “We extend our sincerest congratulations to the winners and finalists.”   For more than 20 years, Design News has recognized the most significant individual and corporate technical achievements in the electronics community.

Analog Devices’ MEMS-Based Industrial Vibration Sensor Receives Prestigious Golden Mousetrap Award from Design News Magazine : ADI’s ADXL001 sensor takes top honors in the Test & Measurement category as the first sensor to provide reliable system failure warning while meeting the cost criteria of industrial applications. Read More »

Analog Devices’ Inertial Sensors Deliver Cost-Effective, Easy-To-Implement Motion Sensing for Industrial and Medical Instrumentation : – ADI expands inertial sensor portfolio with products that deliver unprecedented levels of system control and ease of integration at a fraction of the cost of competing offerings.

Leave a Comment / News / Ibrar Ayyub

MUNICH, Germany (PRWEB) November 11, 2008 “Analog Devices’ iSensor intelligent sensor IMU portfolio has opened new markets and applications for advanced motion sensors,” said Bob Scannell, business development manager, iSensor intelligent sensor products, Analog Devices. “The ADIS16405, which offers pre-calibrated and pre-aligned inertial and magnetic sensors, greatly simplifies the process of implementing full IMU sensor

Analog Devices’ Inertial Sensors Deliver Cost-Effective, Easy-To-Implement Motion Sensing for Industrial and Medical Instrumentation : – ADI expands inertial sensor portfolio with products that deliver unprecedented levels of system control and ease of integration at a fraction of the cost of competing offerings. Read More »

Reduce Installation Time and Cost with Balluff’s New V-Twin Magnetic Field Sensor

Leave a Comment / News / Ibrar Ayyub

Florence, KY (Vocus) April 30, 2009 Balluff has expanded its magnetic field sensor portfolio with the new BMF V-Twin – two sensors, one connector. This revolutionary low profile design allows the user to reduce installation time and cost by requiring only one four conductor cable with either M8 or M12 connections for two end of

Reduce Installation Time and Cost with Balluff’s New V-Twin Magnetic Field Sensor Read More »

Erallo Technologies Awarded SBIR Phase II to Develop a Smart Sensor Monitoring System for Bridges

Leave a Comment / News / Ibrar Ayyub

Littleton, MA (PRWEB) February 24, 2012 Erallo Technologies, Inc. (Erallo) announces the award of a $ 730,000 Phase II Small Business Innovation Research (SBIR) contract from the Department of Defense and the U.S. Army Contracting Command and Bridge Engineering Team (RDECOM-TARDEC) to develop a smart sensor monitoring system for the Armys Line of Communications Bridges.

Erallo Technologies Awarded SBIR Phase II to Develop a Smart Sensor Monitoring System for Bridges Read More »

Economical Capacitive Proximity Sensor Line from Balluff

Leave a Comment / News / Ibrar Ayyub

Florence, KY (Vocus/PRWEB) February 10, 2011 Balluffs economical Global.CProx line of capacitive sensors offers a broad range of products to reliably solve object and level detection applications. The Global.CProx family includes a wide array of tubular M12, M18 and M30 sensors available with either M12 connectors or pre-wired cables. Built to Balluffs high standards, all

Economical Capacitive Proximity Sensor Line from Balluff Read More »

Jennic Appoints Mike Clancy as VP, Worldwide Sales to Exploit Potential in the Wireless Sensor Market

Leave a Comment / News / Ibrar Ayyub

Sheffield, UK (PRWEB) May 12, 2005 As part of its strategy to exploit the low power wireless sensor market – forecast by West Tech Research to exceed 550 million units in 2009 – fabless chip firm Jennic has appointed Mike Clancy as VP worldwide sales. Clancy joins the company from Wolfson Microelectronics, where as vice

Jennic Appoints Mike Clancy as VP, Worldwide Sales to Exploit Potential in the Wireless Sensor Market Read More »

Jennic Introduces Low Cost Wireless Sensor Network Starter Kit for Single Chip IEEE 802.15.4 Wireless Microcontroller

Leave a Comment / News / Ibrar Ayyub

(PRWEB) December 3, 2005 Jennic today announces the general availability of a low cost wireless sensor network starter kit for developing IEEE802.15.4 and ZigBee products based on its single chip wireless microcontroller device. The kit includes sample demonstrations that highlight the potential for remote monitoring and control applications based on the wireless standard, and enables

Jennic Introduces Low Cost Wireless Sensor Network Starter Kit for Single Chip IEEE 802.15.4 Wireless Microcontroller Read More »

Jennic launches IEEE802.15.4 / ZigBee Module Range to Accelerate Wireless Sensor Product Development

Leave a Comment / News / Ibrar Ayyub

Sheffield, UK, (PRWEB) January 7, 2006 Jennic has announced the availability of a new range of IEEE802.15.4 / ZigBee modules enabling rapid development of wireless sensor based products. The JN5121MOxxx range of modules, based on the companys JN5121 single chip wireless microcontroller, is aimed at manufacturers needing to get sensor network products to market quickly

Jennic launches IEEE802.15.4 / ZigBee Module Range to Accelerate Wireless Sensor Product Development Read More »

Quickfilter Digital Filters Providing Intelligent Signal Processing at the Sensor Network Edge

Leave a Comment / News / Ibrar Ayyub

Allen, TX (PRWEB) July 10, 2006 “Intelligent Signal Processing at the Sensor Network Edge” describes trends currently under way in the industry to not only increase the level of networking between sensors, but also to move the signal processing close to the sensor itself. Facilitating these trends and helping our customers overcoming the technical challenges

Quickfilter Digital Filters Providing Intelligent Signal Processing at the Sensor Network Edge Read More »

Scroll to Top