You Are Here: Home » Blog » Electronics News Updates » ESP8266 Wifi enabled 8×64 pixel LED matrix display

ESP8266 Wifi enabled 8×64 pixel LED matrix display




This project is a modification of my previous Bluetooth-enabled LED matrix display project, which used 8×64 monochromatic LED matrix (total 512 LEDs) for displaying scrolling text message. The original project used Bluetooth for display data transfer from a smartphone, but this one now uses Wifi. The display message is sent through web browser to a ESP8266 module that is configured as a web-server. No Arduino or any other microcontroller is used. ESP8266 alone works as a WiFi server and drives the MAX7219-based LED matrices.ESP8266 Wifi enabled 8×64 pixel LED matrix display

Hardware Setup

Things needed (available on my Tindie Store):

The 8×64 pixel display matrix is constructed using eight Easy Matrix display modules in a cascade.

What is Easy Matrix?

Easy Matrix is an easily cascadable 8×8 monochromatic LED dot matrix display module with onboard MAXIM’s MAX7219 LED driver chip. The MAX7219 allows you to drive the LED matrix using only three I/O pins of Arduino or any other microcontroller. The LED matrix module used in Easy Matrix has a bigger dot size (5mm) and has the overall display dimensions of 60.2mm x 60.2mm (2.4″x2.4″). It is easily cascadable in series with the help of precisely aligned male and female header pairs located on the left and right sides of the display module. With lots of freely available Arduino libraries for MAX7219 chip, this module is easy to use in any Arduino project for displaying basic text and animation.

For more detail: ESP8266 Wifi enabled 8×64 pixel LED matrix display

Leave a Comment

You must be logged in to post a comment.

Read previous post:
Personal Home Assistant
Personal Home Assistant

Hardware components: Arduino UNO & Genuino UNO × 1 Atmel ATMega328 × 1 Linear Regulator (7805) × 1 Jumper wires...

Close
Scroll to top