Summary of BINHO MULTI-PROTOCOL USB HOST ADAPTER SUPPORTS I2C, SPI, 1WIRE AND MORE
The Binho multi-protocol USB host adapter enables direct computer-to-hardware interfacing via USB. It supports protocols like I2C, SPI, 1-Wire, and UART, alongside ADC/DAC functionality and programmable GPIO pins. The device features a low-profile aluminum enclosure, an RGB LED, and cross-platform software for Windows, Linux, and Mac. Its field-upgradeable firmware and versatile power rails (3V3/5V) make it a modern tool for circuit testing and development without OS constraints.
Parts used in the Binho Multi-Protocol USB Host Adapter:
- USB Type-C connector
- Low-profile aluminum enclosure
- Programmable RGB status LED
- Single channel DAC output
- Five signal pins for IO mode
- Three-volt-three rail
- VUSB power rail
- Field upgradeable device firmware
The new Binho multi-protocol USB host adapter powered by the USB connection to a host PC allows you to interface your computer directly to hardware circuits.
The Binho adapter has support for 12C @ 3.4 MHz max clock, SPI @12MHz max clock, Dallas 1wire, Atmel single wire interface, UART @ 1000000 max baud as well as support for ADC functionality. It also has a single channel DAC output that can help in case you need to stimulate your circuit with a particular voltage. While in IO mode, its 5 signal pins can serve as digital input or output, digital interrupt, PWM output or analog input or output while the remaining pins assigned to other related or unrelated purposes.
Some of the key features and details of the USB host adapter include:
- Provides 3v3 and VUSB power rails
- 1 DAC outputs and 5 ADC inputs
- Programmable RGB status LED
- Cross platform support for Windows, Linux and Mac.
- Support for GPIO/Interrupt/PWM
- USB Type-C connector
- Low-profile aluminum enclosure
- Field upgradeable device firmware
With the Binho adapter, there is no constraint to a particular Operating System environment as the drivers are already included for most OS. The cross-platform software available for Mac, Windows and Linux, provides an easy-to-use GUI interface for your USB host adapter. The device is also able to provide downstream power to test circuits; for convenience’s sake, it makes available power source from the 3v3 rail or the 5V USB Bus power.
The Binho Multi-Protocol USB Host Adapter brings USB Host Adapters into the 21st Century. No more fumbling through development with cumbersome, clunky, out-dated adapters. Let your productivity soar to new heights!
Read more: BINHO MULTI-PROTOCOL USB HOST ADAPTER SUPPORTS I2C, SPI, 1WIRE AND MORE
- What protocols does the Binho adapter support?
The adapter supports I2C at 3.4 MHz max clock, SPI at 12 MHz max clock, Dallas 1wire, Atmel single wire interface, and UART at 1000000 max baud. - Can the Binho adapter provide power to test circuits?
Yes, the device provides downstream power from the 3v3 rail or the 5V USB Bus power. - Does the Binho adapter work on all major operating systems?
Yes, it offers cross platform support for Windows, Linux, and Mac with included drivers. - How many ADC inputs are available on the device?
The device includes five ADC inputs along with one DAC output. - What is the maximum clock speed for SPI on this adapter?
The maximum clock speed for SPI is 12 MHz. - Is the firmware of the Binho adapter upgradable?
Yes, the device features field upgradeable device firmware. - What type of connector does the Binho adapter use?
The adapter uses a USB Type-C connector. - Can the signal pins be configured as digital interrupts?
Yes, while in IO mode, the five signal pins can serve as digital input, output, digital interrupt, PWM output, or analog input/output.
