A team of researchers made up from the University of California San Diego and California-based company ZPower have developed a flexible, rechargeable silver oxide-zinc battery with a 5 to 10 times greater energy density than standard batteries. A good characteristic of the battery is that it is easier to manufacture because most flexible batteries need to be manufactured in sterile conditions, under vacuum, but this new battery can be screen printed in normal lab conditions. The device can be applied in flexible, stretchable electronics for wearable as well as soft robotics. About the battery, Lu Yin, one of the paper’s co-first authors and a Ph.D. student in the research group of UC San Diego’s nanoengineering Professor Joseph Wang says:
Our batteries can be designed around electronics, instead of electronics needed to be designed around batteries.” He continues “The areal capacity for this innovative battery is 50 milliamps per square centimeter at room temperature—this is 10-20 times greater than the areal capacity of a typical Lithium ion battery. So for the same surface area, the battery described in Joule can provide 5 to 10 times more power. This kind of areal capacity has never been obtained before, and our manufacturing method is affordable and scalable.
The new battery offers higher capacity than any of the flexible batteries currently available on the market thanks to its much lower impedance—the resistance of an electric circuit or device to alternative current. The lower the impedance, the better the battery performance against high current discharge. About future usage, Jonathan Scharf the paper’s co-first author says:
As the 5G and Internet of Things (IoT) market grows rapidly, this battery that outperforms commercial products in high current wireless devices will likely be a main contender as the next-generation power source for consumer electronics.