Summary of 8051 ELEVATOR PROJECT STEPPER MOTOR CONTROL
This project controls a stepper motor elevator system using an 8051 microcontroller. The motor, with a step angle ranging from 3° to 15.3°, is driven by a ULN2003 driver IC, powered by a 12V supply. Six-pin stepper motor windings are energized in sequence to move the elevator to desired floor positions, controlled via five buttons. The system calculates the difference between current and target floor values to decide motor direction. The setup includes code and simulation files for practical implementation.
Parts used in the 8051 Elevator Project Stepper Motor Control:
- 8051 Microcontroller
- 6-pin Stepper Motor
- ULN2003 Driver IC
- +12 Volt Power Supply
- Push Buttons (5)
This application step (step) motor control, input and output ports through 8051 will examine the circuit by providing lift. We use our stepper motor circuit. As we know, certain steps of the stepper motor,… Electronics Projects, 8051 Elevator Project Stepper Motor Control “avr project, microcontroller projects, “
This application step (step) motor control, input and output ports through 8051 will examine the circuit by providing lift.
We use our stepper motor circuit. As we know, certain steps of the stepper motor, moving the appropriate signals are sent to the windings of a motor coach that is brought to the desired position. About this circuit about 3 ° ~ 15.3 ° with a step angle of a stepper motor is used. And our program assigns the value 10 to the tour and variable speed of about 315 ° rotation of the engine have achieved.
Stepper motors are available in the market as we know it ended the 4.5.6. We are in our circuit, we used 6-pin stepper motor. Therefore, we gave two ends to +12 volt supply. Our circuit is typically used to drive the stepper motor circuit, we used all the ULN2003. Thus, when applied to input logical “1”, all the circuits from the output of “0” is received and the motor is driven.
About half are 5 buttons. These buttons can be pressed in case our engine for each floor, how many times would return is known, because the last printed value, then the printed value of the difference between the taking, engine of our transfer we calculate and in this way our engine to the desired point income. The most recent published value compared to the value at that moment pressed, our engine up or down (left or right) will be decided to return.
8051 ELEVATOR SCHEMATIC
8051 Elevator Project Stepper Motor Control keil source code:8051 ELEVATOR PROJECT STEPPER MOTOR CONTROL proteus isis simulation file: 8051-elevator-project-stepper-motor-control.rar
Alternative File Download LINK list (in TXT format): LINKS-2918.zip
