The 2ED24427N01F is a dual-channel ±10 A driver (typical) in a SOIC-8 package with a power pad for increased thermal efficiency The 2ED24427N01F is a dual-channel ±10 A driver (typical) in a SOIC-8 package with a power pad for increased thermal efficiency. It includes one enable pin for both channels and under-voltage lockout (UVLO) protection […]
INFINEON TECHNOLOGIES EICEDRIVER™ LOW SIDE DRIVER 2ED24427N01F Read More »
With high-frequency contactless technology operating at 30 to 300 GHz, often known as mmWave is widely implemented as a sensing technology for proximity detection of objects and motion sensing. Since it operates at a high frequency, meaning the technology uses smaller wavelengths that help in giving it high accuracy and is capable of penetrating materials. Due to the
SMALL FORM FACTOR MMWAVE RADAR SENSOR FOR INDUSTRIAL AND AUTOMOTIVE APPLICATIONS Read More »
DT-BL10 is a development board powered by BL602 WiSoC that sells for around $5. This board is specifically designed to work with a 32-bit RISC-V CPU with dynamic frequency from 1MHz to 192MHz. It has a 276KB SRAM and 128KB ROM. The main focus of this board is on its wide range of wireless support. It has the support
DT-BL10 – LOW-POWER IOT DEVELOPMENT BOARD POWERED BY RISC-V CORE Read More »
Intel has launched three embedded 11th gen, 10nm SuperFin fabricated Tiger Lake ULP3 “E” processors, keeping in mind the growing need for embedded applications. These new processors join with the earlier released nine Tiger Lake U-series ULP3 and lower-power Y-series ULP4 chips. Taking benefit from these new chips Adlink has now released a COM Express Compact Type 6 module
THE NEW E VARIANTS OF INTEL TIGER LAKE LINEUP AND ADLINK CEXPRESS-TL Read More »
Introduction One of the more challenging aspects of owning a home entertainment system is dealing with all the remote controls. My device is designed to tackle this problem. Specifically, the universal remote control I implemented is able to learn the signals used by other remote controls, store those signals in its own memory, and send
Silicon Labs has introduced a new family of small form-factor, high-performance crystal oscillators (XOs) and voltage-controlled crystal oscillators (VCXOs) for applications that require low jitter and frequency-flexible clock synthesis. The Si54x/6x Ultra Series XO/VCXOs deliver jitter performance as low as 80 femtoseconds (fs) for integer and fractional frequencies across the entire operating range, providing outstanding
RF testing is getting quite popular these days, with many devices featuring wireless capabilities. However, RF test devices are quite expensive, therefore slowing down it’s popularity. However, there’s a new RF test device in town which is very affordable, called the TinySA. Under development since February, the RF is now available for pre-order. The tinySA is
HUGEN LAUNCHES PORTABLE TINYSA SPECTRUM ANALYSER Read More »
In this project we built a sketchpad based on LED matrix display with microcontroller and resistive touch screen control. We used a single point resistive touch screen to detect the user’s gesture and microcontroller’s analog/digital converter (ADC) ports collects the data and convert it to coordinates. We designed a LED drive circuit with shift registers
We’ve implemented an autonomous pursuit vehicle capable of chasing a designated target using ultrasonic transmissions. The system is demonstrated by chasing a second, human-controlled, RC car. The pursuit unit is equipped with a 24kHz transmitter and two 40kHz receivers, while the target unit has a 24kHz receiver and a 40kHz transmitter. The target unit responds
While adulations were still being showered on his work on the MORPHESP 240, Dr. Philippe Cadic (@Sulfroid on twitter), recently shared progress on another project called the RFL-Watch, via his twitter handle which is usually loaded with reports on the progress of his projects. Based on the RAK4260, the RFL-Watch is a wearable LoRa communicator device which at the
MEET THE RFL-WATCH: LORA-BASED TEXT COMMUNICATOR Read More »
