You Are Here: Home » Blog » Electronics News Updates » RC Signal Monitor Using Bargraph & RC Switch using Relay

RC Signal Monitor Using Bargraph & RC Switch using Relay




The versatile Bar-Graph SMD components based R/C monitor & R/C switch is a great tool for R/C hobbyist R/C modeller and DIY robotics. Tiny Bar-Graph displays provide a Red color bright, easy to read display of Radio Control (R/C) signal from 1mS to 2mS. The Barograph RC Signal reader is based on PIC16F886 microcontroller. This high performance measurement device, provides unique capabilities and can be used in various applications like Radio Signal Monitor, Robotics, Machine Control, RC Remote Tester, RC Signal ON/OFF switch by connecting Relay board or Solid state relay at output of any suitable LED. Solder Jumpers provided on bottom side of PCB to select particular output to interface with Relay or Solid state Relay.RC Signal Monitor Using Bargraph & RC Switch using Relay

Note: This board has been designed for multiple options and has few extra components. Check BOM carefully before soldering the components.  Solder the parts as described in parts list.

Features

  • Supply 5V DC
  • Input 1mS to 2 ms
  • Display Range 1.5mS to 2mS Center to Left 10 LEDs &  1.5mS to 1mS Center to Right 10Leds
  • Output Display 20 Color RED SMD LEDs
  • Compact Board with SMD Components
  • Supply input Header Connecter
  • Solder Jumper on each LED for Output Control, Alarm, and Relay

SchematicSchematic RC Signal Monitor Using Bargraph & RC Switch using Relay

For more detail: RC Signal Monitor Using Bargraph & RC Switch using Relay

Leave a Comment

You must be logged in to post a comment.

Read previous post:
ESP8266 16MB Flash Handling
ESP8266 16MB Flash Handling

In recent weeks a number of ESP8266 devices have become available offering more than the previous defacto maximum of 4MB...

Close
Scroll to top