You Are Here: Home » Blog » Electronics News Updates » Triple output lab power supply offers paralleling & tracking

Triple output lab power supply offers paralleling & tracking




The MX100T from Aim-TTi (Aim Thurlby Thandar) is a 315W precision laboratory power supply’s three outputs can each provide 0 to 35 V at 0 to 3 A. Range switching extends the capabilities so that outputs can be set to 16 V/6 A or 70 V/1.5 A for maximum versatility; where higher power is needed from one output, internal switching circuitry enables up to 210 W arranged as either 35 V/6 A or 70 V/3 A.

Triple output lab power supply offers paralleling & tracking

All outputs are fully isolated and independent but voltage tracking can be selected to make two or even three outputs track a single voltage control. The isolated tracking capability is useful for creating tracking voltages to different ground points, tracking voltages of opposite polarity, or series and parallel connection of outputs.

The MX100T has a large backlit graphic LCD display that can show full settings for all three outputs simultaneously. Soft key control provides a fast and intuitive user interface that includes other display modes and menu screens when required. Voltages and currents can be set by direct numeric entry or in quasi-analogue mode using the large spin wheel. Each output has switchable remote sensing and variable over-voltage and over-current protection trips.

 

For more detail: Triple output lab power supply offers paralleling & tracking

Leave a Comment

You must be logged in to post a comment.

Read previous post:
Driving a DC motor using PWM with AVR ATmega

This library is an update of the software PWM driver you can find here: http://davidegironi.blogspot.it/2013/03/controlling-dc-motor-speed-and_6.html For DC motor information please...

Close
Scroll to top