Lampduino is a computer-controlled free-standing floor lamp, comprised of an 8×8 RGB LED matrix. The lamp stands 45″ high and 18″ wide. Light emanates from both sides. It has various display modes, as well as an included editor for creating animations. The lamp is controlled via an application running on a PC host. The display […]
Lampduino – an 8×8 RGB Floor Lamp Read More »
Nokia manufactures a wide variety of cell phones and many of their cheaper phones contain simple LCD’s which may be used in microcontroller projects. There is one particular LCD model that is used in a wide variety of their phones and is often referred to as simply a “Nokia LCD“, or “Nokia 6100 LCD”. I
How To Use a Nokia Color LCD using an AVR Read More »
This is a mutli-mode clock project based on attiny2313. it employs a 8×8 led matrix as display. with the limited resolution, this 12 hour clock shows time in 6 different modes. The circuit employs row and column multiplexing to drive the leds, one row at a time, this gives a 12.5% duty cycle when “sets”
ATTiny2313 Multi-mode LED Matrix Clock Read More »
Description Features: Measures temperatures from -55°C to +125°C Three LED’s to indicate in what range the temparature is. User definable thermostat with high and low settings Output via a relay to control a heater element or a blower fan (or something else) Power supply ………………….4.5 to 5.5 VDC Power consumption ………..15mA This circuit uses a
Temperature Indicator Using attiny2313 micrcontroller Read More »
This project displays the temperature on an LCD display with an resolution of 0.06degrees. DS1820 is used for sensing the temperature. It can measure temperature range from -55deg to +125deg. But i take care of only the possitive temperature. There are 3 switches to change the alarm temperature, the user can increment the Alarm temperature
DS1820 Temperature Controller using atmega8515 microcontroller Read More »
Here’s an another project, which makes an Scrolling LED display. Here 64 leds which are connected to an Matrix display. The Anodes are drived through an Driver IC UDN2981 and the cathodes are drived through ULN2803. The Atmega8515 is used in this project to control the display. The microcontroller is programmed with Bascom AVR. Circuit
8×8 Dotmatrix Scrolling LED display using atmega8515 microcontroller Read More »
This project is used to automate the home appliances through Bluetooth enabled PC. You can use the USB Bluetooth at the PC side and an Serail Bluetooth converter is used at the microcontroller side. The sparkfun bluetooth module is used here, but you can use any serial bluetooth module which supports SPP profile. Atmega8 microcontroller
Bluetooth Based Smart Home using atmega8 microcontroller Read More »
Here’s an another project with LED. It can show different patterns. There are 11 channels of LED. Circuit Diagram For more Detail: Multipattern Running light using ATtiny2313 microcontroller
Multipattern Running light using ATtiny2313 microcontroller Read More »
Description The TC77 is a digital temperature sensor with a Serial Peripheral Interface. Temperature data is converted from the internal thermal sensing element and made available at anytime as a 13-bit two’s compliment digital word. Communication with the TC77 is accomplished via a SPI and MICROWIRE compatible interface. It has a 12-bit plus sign temperature
LCD Thermometer TCN77 Using AVR Microcontroller Read More »
Description This small thermometer board uses the Microchip TCN75 device. It is a cheaper clone of the LM75, it costs about 2,50 Euro. The TCN75 comes in a SO8 packaging. The TCN75 is a serially programmable temperature sensor. It has an output that is programmable as either a simple comparator for thermostat operation or as
LCD Thermometer TCN75 Using ATTiny2313 Read More »
