Summary of USB JOYSTICK CONVERTER FOR ATARI, AMIGA, COMMODORE 64
This article describes a USB joystick converter circuit that allows old Atari, Commodore 64, and Amiga joysticks to function on modern computers. The device utilizes an Atmel ATmega8 microcontroller and operates without drawing power from the USB port, supporting 5V operation. It features plug-and-play functionality with no additional drivers required, relying on firmware derived from the MJoy-project.
Parts used in the USB Joystick Converter for Atari, Amiga, Commodore 64:
- Atmel ATmega8 microcontroller
- Analog gameport joystick or digital joystick (Atari, C64, Amiga)
- USB port connection interface
- Firmware based on the MJoy-project
- Power supply providing 5Volt
Old atari, commodore-64, amiga joystick you can use on your computer usb converter circuit circuit based on Atmel ATmega8-pin adapter does not require power from the USB port in addition to working with 5Volt…Electronics Projects, USB Joystick Converter for Atari, Amiga, Commodore 64 “avr project, microcontroller projects, “
Old atari, commodore-64, amiga joystick you can use on your computer usb converter circuit circuit based on Atmel ATmega8-pin adapter does not require power from the USB port in addition to working with 5Volt
Joystick Adapter is for connecting an analog gameport joystick or a digital (atari, c64, amiga) joystick to the USB port. The firmware is based on the MJoy-project from Mindaugas Milasauskas which is based on the USB firmware from Igor Cesko. No additional software or driver is needed – just plug and play.
Source: https://320volt.com/en/atari-commodore64-amiga-joystickleri-icin-usb-cevirici/ USB Joystick Converter for Atari, Amiga, Commodore 64 alternative link:usb-joystick-converter-for-atari-amiga-commodore-64.rar alternative link2 alternative link3
- What is the primary function of this project?
The adapter connects analog gameport or digital joysticks like Atari, C64, and Amiga models to a USB port. - Does the circuit require power from the USB port?
No, the circuit does not require power from the USB port as it works with 5Volt independently. - Is additional software or driver installation needed?
No, no additional software or driver is needed; the device operates on a plug-and-play basis. - What microcontroller is used in the converter circuit?
The circuit is based on the Atmel ATmega8 microcontroller. - Where did the firmware originate?
The firmware is based on the MJoy-project by Mindaugas Milasauskas, which uses USB firmware from Igor Cesko. - Can this adapter work with both analog and digital joysticks?
Yes, it supports connecting both analog gameport joysticks and digital joysticks from Atari, C64, and Amiga systems.
