Posts by Ibrar Ayyub:
FOVEA – WEARABLE EMBEDDED MULTIMETER
Posted on: 16 Jan 2020
FOVEA is a wearable embedded analyzer — a multimeter targeted at embedded electronics with wrist-worn convenience. FOVEA, their wearable embedded analyzer does a few primary things to make embedded work easier: (a) It moves the multimeter display to a location that’s much closer to where the probes are being held, and also with almost the […]
EPIC-KBS9-PUC: PROVEN PERFORMANCE FOR YOUR EMBEDDED APPLICATION
Posted on: 14 Jan 2020
AAEON, an industry leader in embedded computing systems, announces the EPIC-KBS9-PUC barebones embedded system. Built upon our success and knowledge, the EPIC-KBS9-PUC offers the power of 6th and 7th Generation Intel Core Processors, four Gigabit Ethernet ports, and a range of expandability and customization to support your application. The EPIC-KBS9-PUC is a barebones system based on our […]
EXPERIMENTAL NEXT-GENERATION CHIP-SCALE ATOMIC CLOCK
Posted on: 13 Jan 2020
Physicists at the National Institute of Standards and Technology (NIST) and partners have demonstrated an experimental, next-generation atomic clock—ticking at high “optical” frequencies—that is much smaller than usual, made of just three small chips plus supporting electronics and optics. Described in Optica, the chip-scale clock is based on the vibrations, or “ticks,” of rubidium atoms confined in a tiny […]
ESPRESSIF ANNOUNCES THE RELEASE OF ESP32-S2 SECURE WI-FI MCU
Posted on: 12 Jan 2020
Espressif announces the release of the ESP32-S2 Secure Wi-Fi MCU, which is a highly integrated, low-power, 2.4 GHz Wi-Fi Microcontroller SoC supporting Wi-Fi HT40 and 43 GPIOs. Based on Xtensa® single-core 32-bit LX7 processor, ESP32-S2 can be clocked at up to 240 MHz. ESP32-S2 is a highly integrated, low-power, 2.4 GHz Wi-Fi Microcontroller SoC supporting […]
SMALL FORM FACTOR BOARD HAS COMPUTING POWER FOR MEDICAL AND IOT
Posted on: 11 Jan 2020
Populated with the Intel Core i5 7300U and i3 7100U processors, the WUX-7x00U is a small form factor (SFF) embedded board by Portwell. The processors, formerly codenamed Kaby Lake, integrate the low power Intel Gen. 9.5 HD Graphics, 620 graphics engine with 24 execution units, enabling enhanced 3D graphics performance and higher speed for 4K encode and […]
OPENWRT MODULE AND DEV BOARD BASED ON REALTEK SOC FEATURES WAVE2
Posted on: 10 Jan 2020
8 devices is accepting pre-orders for its $29 Komikan module, and sandwich-style $59 Komikan DVK development board for Wave2 prototyping at up to 1.166Gbps. The Komikan module runs OpenWrt on a MIPS24k-based Realtek SoC with dual-band, MU-MIMO 802.11ac. The Komikan has the ability to operate without a heatsink, as well as having a lower, 6W power consumption compared to other Wave2 […]
SYSTEM-ON-MODULE WITH POLARFIRE FPGA AT EMBEDDED WORLD
Posted on: 09 Jan 2020
Specialist for embedded services and products, ARIES Embedded, will display the new M100PF System-on-Module (SoM) based on Microchip’s PolarFire FPGA family at embedded world 2019. At stand 441 in hall 3A ARIES Embedded will also introduce the complementary evaluation platform M100PFEVP, which delivers a fast and easy project start for customers. Our new M100PF board […]
RENESAS SYNERGY™ – FMLR-61-U-RSS3 LORA® MODULE DESIGNED BY MIROMICO
Posted on: 08 Jan 2020
Renesas Synergy™ goes LoRa® with the new, tiny FMLR-61-U-RSS3 modules equipped with the latest software “LoRa Basics™ MAC” and now available at Avnet Silica. Everybody wants to connect “things” to the “IoT” and LoRa® is the ultimate technology to do so across long distances (up to 50km LOS). The new, tiny FMLR-61-U-RSS3 module, designed by Miromico, comes […]
ALPS ALPINE DEVELOPS FORCE SENSOR WITH HIGH IMPACT RESISTANCE
Posted on: 07 Jan 2020
Alps Alpine Co., Ltd., a manufacturer of high-quality electronic products, has added the HSFPAR004A Force Sensor to its lineup. The sensor enhances impact resistance while maintaining the industry’s smallest size*1)and offers high linearity and high resolution, which makes it ideal for use in stylus pens and other input devices. These days, electronic blackboards and tablets are being […]
SEEED STUDIO FUSION PCBA SERVICE – FREE ASSEMBLY FOR 5 PCBS
Posted on: 06 Jan 2020
To the ire of many, manufacturing in small quantities have often led to sky high prices, hindering many makers from translating their ideas to reality. Now, to eliminate cost barriers and enable even more makers to experience the flexibility and convenience of turnkey PCB fabrication and assembly, Seeed Fusion is waiving off the assembly costs for the Seeed […]
