DHT22 Humidity datalogger

There is a large cellar where I could store unused items and documents, but the catch is the humidity there. It is a root cellar near a small brook and the humidity varies between 75% up to 90%.
Archived material should never be exposed to humidity greater than 65%, therefore I have to isolate all documents in boxes from the air of the cellar. But are this boxes safe? Do they keep the humidity away from the documents – even for years?
DHT22 Humidity datalogger
To have a look into the box environment, I need a data logger. It would be simple to buy one, but much more fun to build one. So a new project is born: I call it the “Data Logger” project.
There are a few phases to realise this project:

  • Prototype (done)
  • Simple Version (in work)
  • Deluxe Version with Display and Case

The Prototype

For the prototype I used a large solderless breadboard from 3M. There I actually just tested the components for the simple version, especially if the protocols are working and if I can use them in the way intended. I will keep this section short and explain everything in detail in the next section. Just to remind you, I tested everything on a breadboard before I soldered the components to a stripboard.

Parts of The Simple Version

The simple version should be a data logger which automatically starts logging temperature and humidity values it it is powered on. Using a small switch, I can select between logging, reading and erase. In the reading mode, the logger will send all logged values to the serial interface.
Because I need quick results, I will build the whole device using components from Adafruit. Here a list of components I will use for the simple version of the data logger:

These components have an excellent quality. The price today for all the components above is $97. You can buy a similar data logger for approximate $80, e.g. the RHT10 from Extech. Just to make clear this project is more for fun. If you need a cheap solution, better buy a cheap one from Amazon.
For more detail: DHT22 Humidity datalogger


About The Author

Ibrar Ayyub

I am an experienced technical writer holding a Master's degree in computer science from BZU Multan, Pakistan University. With a background spanning various industries, particularly in home automation and engineering, I have honed my skills in crafting clear and concise content. Proficient in leveraging infographics and diagrams, I strive to simplify complex concepts for readers. My strength lies in thorough research and presenting information in a structured and logical format.

Follow Us:
LinkedinTwitter

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top