Nano Machine Switches Between Biological and Silicon Worlds

(PRWEB) April 26, 2006

Scientists have created a molecular switch that could play a key role in thousands of nanotech applications. The Mol-Switch project successfully developed a demonstrator to prove the principle, despite deep scepticism from specialist colleagues in biotechnology and biophysics.

“Frankly, some researchers didn’t think what we were attempting was possible,” says Dr Keith Firman, at Portsmouth University and Mol-Switch project coordinator, funded under the European Commissions Future and Emerging Technologies initiative. “However, we got our molecular switch to work.”

The upshot is that the Mol-Switch project was far more successful than expected. The team’s switch works with a number of DNA-based motors and can achieve incredible performance.

Specific sensors, which emit electrons, can tell if the biological motor is working, so the switch links the biological world with the silicon world of electronic signals.

Here’s how it works. The team uses a microfluidics chip that includes a number of channels measured in nano-metres. The novelty of microfluidics is that it can channel liquids in laminar, or predictable, flow.

The floor of this channel is peppered with Hall-Effect sensors. The Hall Effect describes how a magnetic field influences an electric current. That influence can be measured to a high degree of accuracy. These measurements link the biological motor with the electronic signals of the silicon world.

The biological element of the device starts with a DNA molecule fixed to the floor of the microfluidic channel. This strand is held upright, like a string held up by a weather balloon, by anchoring the floating end of the DNA strand to a magnetic bead, itself held up under the influence of magnetism.

A specific type of protein, called a Restriction-Modification enzyme, provides one of the DNA motors. This type of DNA motor will only bind to a specific sequence of the DNA bases A, C, G and T. “This binding is very specific, a motor will bind only with its corresponding bases, so you can control exactly where the motor is placed on the vertical DNA strand,” says Firman.

The motor is attached to the strand at the specific sequence of bases. Then the team introduces ATP, the phosphate molecule that provides energy within living cells, into the microfluidics channel. This is the fuel for the motor. The motor then pulls the upright DNA strand through it until it reaches the magnetic bead, like a winch lowering a weather balloon.

A Hall-Effect sensor can measure the vertical movement of the magnetic bead which indicates whether the switch is on or off. That, in an over-simplified nutshell, is the essence of the molecular switch, an actuator for the nano-scale world.

This is particularly important because a nano-scale actuator will be immensely useful. An actuator is a mechanism that supplies and transmits a measured amount of energy for the operation of another mechanism or system. It can be a simple mechanical device, converting various forms of energy to rotating or linear mechanical energy. Or it can convert mechanical action into an electrical signal. It works both ways.

“The light switch, the button that makes a retractable pen, all these are actuators, and by developing a molecular switch we’ve created a tiny actuator that could be used in an equally vast number of applications,” says Firman.

The number of potential applications is staggering. They can be used for flow-control valves, pumps, positioning drives, motors, switches, relays and biosensors.

The system could be used to develop molecular circuits, or even molecular scale mechanical devices. The potential applications are difficult to predict, but are only limited by the imagination of researchers, such is the versatility of an actuator on this scale.

“It could be used as a communicator between the biological and silicon worlds. I could see it providing an interface between muscle and external devices, through its use of ATP, in human implants. Such an application is still 20 or 30 years away,” says Firman “It’s very exciting and right now we’re applying for a patent for the basic concepts.”

One hugely important application is DNA sequencing, discovering the order of the four DNA-bases, the absolutely fundamental step for genetic research. This is almost a ‘bonus’ application, a happy side effect of the actuator’s operation.

PLEASE MENTION IST RESULTS AS THE SOURCE OF THIS STORY AND, IF PUBLISHING ONLINE, PLEASE HYPERLINK TO: http://istresults.cordis.lu/


Contact: Tara Morris, +32-2-2861985, tmorris at gopa-cartermill.com

###




Find More Electronic Circuit Press Releases


About The Author

Ibrar Ayyub

I am an experienced technical writer holding a Master's degree in computer science from BZU Multan, Pakistan University. With a background spanning various industries, particularly in home automation and engineering, I have honed my skills in crafting clear and concise content. Proficient in leveraging infographics and diagrams, I strive to simplify complex concepts for readers. My strength lies in thorough research and presenting information in a structured and logical format.

Follow Us:
LinkedinTwitter

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top