ScanaPLUS is a robust, versatile and multi-application 9 Channels logic analyzer. It relies on the free ScanaStudio software to capture and analyze logic signals.
This logic analyzer will capture signals at a steady rate of 100 MSPS (Million Samples Per Seconds), whether you’re using 1 or all 9 channels. No compromises.
Thanks to its configurable and fully protected input stage, ScanaPLUS can be directly connected to RS232, to CAN or RS485 differential lines, or to tiny 1.2V logic signals!
Plus, a logic analyzer with 9 channels, will allow you to work with 8-bit buses, having a 9th channel left for a synchronization signal.
Worry no more about maximum capture time or transfer speed from device to computer. ScanaPLUS relies on a proprietary FPGA based compression and streaming algorithm, that will capture signals for as long as your computer can take!
Basic information
- 100 MSPS (Million samples per second).
- Accuracy: ± 10 ns
- Maximum capture time: 1000 seconds *
- Number of channels: 9.
- Dimensions: 73 x 46 x 17 mm (2.87 x 1.81 x 0.67 inches)
- Weight: 59 gm (2.08 oz)
*(Maximum capture time of 1000 seconds is only limited by software capabilities, it may be increased via future software updates)
Input features and characteristics
- Number of adjustable logic threshold groups: 2
- Adjustable logic levels for each group: 1.2V, 1.5V, 1.8V, 2.8V, 3.3V to 5V
- Number of integrated receivers for RS232 bus: 5
- Number of integrated receivers for LIN bus: 5
- Number of integrated differential lines receivers: 2 (can used for CAN, RS485, etc.)
- Activity LED integrated to ScanaPLUS device quickly indicates logic change on any line
- Input operating range ± 35V
- Absolute maximum input range ± 50V
- Input impedance 100KΩ || 5pF
For more detail: ScanaPLUS: 9-Channels, 100MHz Logic Analyzer