Component

DIGI KEY INTRODUCES PART TRACING FOR CUT TAPE PRODUCTS TO IDENTIFY SMD COMPONENTS EVEN OUTSIDE LABELED BAGS

DIGI-KEY INTRODUCES PART TRACING FOR CUT TAPE PRODUCTS TO IDENTIFY SMD COMPONENTS EVEN OUTSIDE LABELED BAGS

Digi-Key Electronics is introducing Part Tracing on select cut tape products to further enhance traceability and product customization offerings, and make it easier for customers to visually verify cut tape products. This new Part Tracing feature will enable engineers to better organize their components and also improve traceability. Across the electronic component industry, the traceability of […]

DIGI-KEY INTRODUCES PART TRACING FOR CUT TAPE PRODUCTS TO IDENTIFY SMD COMPONENTS EVEN OUTSIDE LABELED BAGS Read More »

Site enables detailed component comparisons

Choosing components is a series of time-consuming tasks, from surveying the market for possible candidates to properly evaluating performance. As a hardware engineer who has worked in Silicon Valley for 10 years, I have spent significant time developing test plans and specs, building fixtures, and testing components. One of the reasons comparing components takes a

Site enables detailed component comparisons Read More »

Happy birthday, Transistor becomes 65

Happy birthday, Transistor becomes 65 – [ via ] The transistor, the ubiquitous building block of all electronic circuits, will be 65 years old on Sunday. The device is jointly credited to William Shockley (1910-1989), John Bardeen (1908-1991) and Walter Brattain (1902-1987), and it was Bardeen and Brattain who operated the first working point-contact transistor during an experiment conducted on 16 December 1947

Happy birthday, Transistor becomes 65 Read More »

Air2U USB ADAPTER USES RF MICRO DEVICES’ ULTIMATEBLUE SINGLE-CHIP BLUETOOTH COMPONENT

GREENSBORO, NC (PRWEB) September 16, 2004 RF Micro Devices, Inc. (Nasdaq: RFMD), a leading provider of proprietary radio frequency integrated circuits (RFICs) for wireless communications applications, today announced that Air2U, a leading Taiwanese designer and manufacturer of wireless consumer electronics products, is using RFMD’s SiW3000 UltimateBlue single-chip Bluetooth component in its USB adapter. The adapter

Air2U USB ADAPTER USES RF MICRO DEVICES’ ULTIMATEBLUE SINGLE-CHIP BLUETOOTH COMPONENT Read More »

IPFlex’s DAPDNA-2 Dynamically Reconfigurable Processor Chosen as Key Component in FAST Corporation’s High-Speed Image Processing Board

(PRWEB) November 30, 2004 IPFlex Inc. (headquartered in Tokyo Japan, hereafter referred to as IPFlex) today announced FAST Corporation (headquartered in Kanagawa Japan, hrereafter referred to as FAST) has chosen IPFlex’s DAPDNA-2 (see Note 1) Dynamically Reconfigurable Processor (see Note 2) as a key component of the FVDDP01 high-speed image processing board.   In the

IPFlex’s DAPDNA-2 Dynamically Reconfigurable Processor Chosen as Key Component in FAST Corporation’s High-Speed Image Processing Board Read More »

Optical Component Worldwide Markets at $2.9 Billion are Expected to Reach $7.6 Billion by 2012

Dublin (PRWEB) April 24, 2006 Research and Markets (http://www.researchandmarkets.com/reports/c35909) has announced the addition of Optical Component Market Opportunities, Strategies, and Forecasts, 2006 to 2012 to their offering.   As networks are implemented for triple play, they become complex, driving the need for fast transport based on optics. Manufacturers of communications and computer equipment are increasingly

Optical Component Worldwide Markets at $2.9 Billion are Expected to Reach $7.6 Billion by 2012 Read More »

Power Integrations' New LinkSwitch

SAN JOSE, Calif. (PRWEB) May 27, 2008 LinkSwitch-II, a new generation in Power Integrations’ extremely successful LinkSwitch series of ICs, simplifies the design of accurate output CV/CC converters by eliminating the need for optocouplers and all secondary-side CV/CC control circuitry as well as all control-loop compensation circuitry. By integrating all control and protection circuitry plus

Power Integrations' New LinkSwitch Read More »

Analog Devices Adds Direct Conversion Receiver Solution for Next Generation Cellular and Broadband Wireless to RF Portfolio : – Demodulator and dual-channel digital gain trim amplifier reduce component count up to 60 percent.

NORWOOD, Mass. (PRWEB) June 16, 2008 With the ADL5380 demodulator, base station receivers can be designed for a variety of cellular and broadband wireless data systems and standards including CDMA, W-CDMA, TD-SCDMA, PHS, LTE, and WiMAX. The ADL5380 is also an ideal solution for defense and avionics equipment, including software-defined radio, due to the broad

Analog Devices Adds Direct Conversion Receiver Solution for Next Generation Cellular and Broadband Wireless to RF Portfolio : – Demodulator and dual-channel digital gain trim amplifier reduce component count up to 60 percent. Read More »

Power Integrations Launches Charger/Adapter Reference Designs Using New LinkSwitch

SAN JOSE, Calif. (PRWEB) June 19, 2008 Traditionally, switched-mode power supplies use a secondary circuit to sense the output voltage and feed error signals back to the primary-side controller. LinkSwitch-II uses a transformer winding to sense the output voltage, eliminating the need for the secondary circuit. This not only reduces component count by as much

Power Integrations Launches Charger/Adapter Reference Designs Using New LinkSwitch Read More »

Scroll to Top