Current

BQ25171 Q1 – 800 MA LINEAR BATTERY CHARGER FOR 1 TO 2 CELL LI ION LIFEPO4 AND 1 TO 6 CELL NIMH

BQ25171-Q1 – 800-MA LINEAR BATTERY CHARGER FOR 1- TO 2-CELL LI-ION, LIFEPO4, AND 1- TO 6-CELL NIMH

Texas Instruments bq25171-Q1 Linear Battery Charger is an automotive rated 800mA linear charger for 1-cell and 2-cell Li-Ion, Li-Polymer, and LiFePO4, in addition to 1-cell up to 6-cell NiMH battery applications. The device has a single power output that charges the battery. The system load can be placed in parallel with the battery as long as the average […]

BQ25171-Q1 – 800-MA LINEAR BATTERY CHARGER FOR 1- TO 2-CELL LI-ION, LIFEPO4, AND 1- TO 6-CELL NIMH Read More »

ACHS 719X LINEAR CURRENT SENSOR ICS

ACHS-719X LINEAR CURRENT SENSOR ICS

Broadcom’s ACHS-719x sensor ICs have a compact, surface mountable, SO-8 package that meets worldwide regulatory safety standards The Broadcom ACHS-719x (Âą10 A to Âą50 A) fully integrated Hall effect-based isolated linear current sensors are designed for AC or DC current sensing in industrial, commercial, and communications systems. Inside each ACHS-719x IC is a precise, low-offset, linear Hall

ACHS-719X LINEAR CURRENT SENSOR ICS Read More Âť

TINYCHARGER – SINGLE CELL LI ION BATTERY CHARGER WITH MONITORING

TINYCHARGER – SINGLE CELL LI-ION BATTERY CHARGER WITH MONITORING

TinyCharger is an ATtiny25/45/85-based, single-cell Li-ion battery charger with selectable charging current limit (100mA – 1000mA) and an OLED display for monitoring. For battery charging the TP4056 is used. The TP4056 is a complete constant-current/constant-voltage linear charger for single cell lithium-ion batteries. The maximum charge voltage is fixed at 4.2V and the charge current can be programmed

TINYCHARGER – SINGLE CELL LI-ION BATTERY CHARGER WITH MONITORING Read More »

PLEA67 SERIES THIN FILM POWER INDUCTORS OFFER IMPRESSIVE RATED CURRENT

PLEA67 SERIES THIN-FILM POWER INDUCTORS OFFER IMPRESSIVE RATED CURRENT

TDK Corporation’s inductors are available in a compact external size and an impressive rated current TDK Corporation has developed the PLEA67 series of inductors for use in true wireless stereo (TWS) devices. TWS devices are finding increasing applications with smartphones, smartwatches, and other wearables and in turn, the demand for electronic components in this domain is rising. This

PLEA67 SERIES THIN-FILM POWER INDUCTORS OFFER IMPRESSIVE RATED CURRENT Read More Âť

GAN IS AS EASY TO USE AS SILICON EPC INTRODUCES A 48 V TO 12 V DEMO BOARD

GAN IS AS EASY TO USE AS SILICON: EPC INTRODUCES A 48 V TO 12 V DEMO BOARD

EPC announces the availability of the EPC9157, a 300 W DC-DC demo board in the tiny 1/16th brick size, measuring just 33 mm x 22.9 mm x 9mm (1.3 x 0.9 x 0.35 in). The EPC9157 demo board integrates the Renesas ISL81806 80 V dual synchronous buck controller with the latest-generation EPC2218 eGaN FETs from EPC

GAN IS AS EASY TO USE AS SILICON: EPC INTRODUCES A 48 V TO 12 V DEMO BOARD Read More Âť

100V HIGH CURRENT PHOTORELAY RELEASED IN DIP4 PACKAGE FOR INDUSTRIAL EQUIPMENT

100V HIGH-CURRENT PHOTORELAY RELEASED IN DIP4 PACKAGE FOR INDUSTRIAL EQUIPMENT

Toshiba Electronics has released a 100 V high-current photorelay, TLP241B for industrial equipment building automation systems and mechanical relay replacements, security systems, heating, ventilation and air conditioning (HVAC), Battery Management System (BMS), etc. Encompassed in a DIP4 package, this new device comprises of a photo MOSFET optically coupled to an infrared light-emitting diode. The ability of TLP241B photorelay to provide an

100V HIGH-CURRENT PHOTORELAY RELEASED IN DIP4 PACKAGE FOR INDUSTRIAL EQUIPMENT Read More Âť

FOR HIGHER POWER DENSITY AND REDUCED BOM MELEXIS MLX91220 21 CURRENT SENSORS AT RUTRONIK

FOR HIGHER POWER DENSITY AND REDUCED BOM: MELEXIS MLX91220/21 CURRENT SENSORS AT RUTRONIK

Minimize thermal losses: With the MLX91220 and MLX91221, Melexis presents two integrated current sensors for AC and DC measurements with an analog interface. These are isolated integrated Hall-effect current sensors with 0-50A and dual OCD (overcurrent detection). This all-in-one solution offers an optimal symbiosis of small size, low impedance, high bandwidth and isolation. Dual on-chip

FOR HIGHER POWER DENSITY AND REDUCED BOM: MELEXIS MLX91220/21 CURRENT SENSORS AT RUTRONIK Read More Âť

XENSIV™ MAGNETIC AND PRESSURE SENSORS

XENSIV™ MAGNETIC AND PRESSURE SENSORS

Infineon provides exceptionally precise magnetic sensors comprising industry-leading Hall switches, linear Hall, angle, 3D Hall, and current sensors as well as MAP and BAP pressure sensors. With more than 40 years of experience and a strong understanding of customer needs, Infineon has designed one of the broadest portfolio of sensor types on the market. The

XENSIV™ MAGNETIC AND PRESSURE SENSORS Read More »

LITTLE BEE AFFORDABLE HIGH PERFORMANCE CURRENT MAGNETIC FIELD PROBE

LITTLE BEE, AFFORDABLE HIGH-PERFORMANCE CURRENT & MAGNETIC FIELD PROBE

A campaign for a current probe called Little Bee was launched on Crowdsupply. Little Bee is an affordable and high-performance current probe and magnetic field probe that enables you to debug and analyze electronic devices more effectively. This device comes in handy because current probes available today are expensive, therefore having a limited number of users. Current probes

LITTLE BEE, AFFORDABLE HIGH-PERFORMANCE CURRENT & MAGNETIC FIELD PROBE Read More Âť

FUNCTION RICH RESETTABLE EFUSE FOR CONSUMER GOODS

FUNCTION-RICH RESETTABLE EFUSE FOR CONSUMER GOODS

Resettable eFuse maintains high safety through repeated use with adjustable over-voltage protection plus flagging capabilities. Expanding its range of advanced eFuse ICs, the TCKE712BNL from Toshiba Electronics Europe GmbH ensures that the highest degrees of safety are always maintained. It is targeted at a broad spectrum of different consumer electronics goods – including cameras, cordless cleaner and

FUNCTION-RICH RESETTABLE EFUSE FOR CONSUMER GOODS Read More Âť

Scroll to Top