MonolithIC

LTC3815 – 6A Monolithic Synchronous DC/DC Step-Down Converter

Leave a Comment / Electronics News Updates /

Features 2.25V to 5.5V Input Voltage Range ±1% Total Output Voltage Accuracy Over Temperature at VIN = 3.3V or 5V Single Resistor-Programmable Output Voltage PMBus Compliant Serial Interface: Programmable Output Voltage Margining: Up to ±25% VOUT Range with 0.1% Resolution Read back of Average and Peak Temperature, Current, and Voltage (25Hz Refresh Rate) Fault Status […]

LTC3815 – 6A Monolithic Synchronous DC/DC Step-Down Converter Read More »

MONOLITHIC POWER SYSTEMS MPS MP3364 4 CHANNEL BOOST WLED DRIVER

MONOLITHIC POWER SYSTEMS (MPS) MP3364 4-CHANNEL BOOST WLED DRIVER

Leave a Comment / Electronics News Updates /

Monolithic Power Systems (MPS) MP3364 4-Channel Boost WLED Driver is a step-up converter with four-channel current sources. The device is designed to drive white LED arrays as backlighting for small- or medium-sized LCD panels. The device uses peak current mode as its PWM control architecture to regulate the boost converter. Four-channel current sources are applied to the LED

MONOLITHIC POWER SYSTEMS (MPS) MP3364 4-CHANNEL BOOST WLED DRIVER Read More »

Dual Monolithic Synchronous Step-Down DC/DC Regulator

Leave a Comment / Blog /

Description The LTC®3607 is a 15V dual 600mA monolithic synchronous step-down regulator which has only 55μA quiescent current. Intended for a variety of applications, including dual lithium-ion battery products, it operates from a wide 4.5V to 15V input voltage range. It features a constant 2.25MHz switching frequency, enabling the use of tiny, low cost capacitors

Dual Monolithic Synchronous Step-Down DC/DC Regulator Read More »

Monolithic 4A High Voltage 1 Cell Li-Ion Battery Charger

Leave a Comment / Blog, Electronics News Updates /

Features Wide Input Voltage Range: Up to 32V (40V Absolute Maximum) Programmable Charge Current Up to 4A Selectable C/10 or Onboard Timer Termination Dynamic Charge Rate Programming/Soft-Start Programmable Input Current Limit 0.5% Float Voltage Accuracy 7.5% Charge Current Accuracy 4% C/10 Detection Accuracy NTC Resistor Temperature Monitor Auto-Recharge at 97.5% Float Voltage Auto-Precondition <70% Float

Monolithic 4A High Voltage 1 Cell Li-Ion Battery Charger Read More »

Virtium Releases 8GB VLP DDR3-1600 Registered DIMM (VLP RDIMM) Industrial Memory Module Using 2Gbit Monolithic Components

Leave a Comment / News /

Rancho Santa Margarita, CA (PRWEB) December 09, 2011 Virtium Technology, Inc., a solutions-driven designer and manufacturer of Industrial Memory and Flash Storage Solutions for Embedded and Telecommunication OEMs announced today its high speed PC3-12800 (DDR3-1600) 8GB VLP RDIMM monolithic module. This offering is targeted toward high performance bandwidth ATCA blade applications and fulfills the current

Virtium Releases 8GB VLP DDR3-1600 Registered DIMM (VLP RDIMM) Industrial Memory Module Using 2Gbit Monolithic Components Read More »

MonolithIC 3D Inc. Announces Ultra-Scale Integration Scheme

Leave a Comment / News /

San Jose, CA (PRWEB) December 20, 2011 MonolithIC 3D Inc., a leading 3D-IC company, announced its Ultra-Scale Integration scheme last week. The technology promises to improve the integration level of chips by more than 100x, thereby providing breakthrough performance improvements for supercomputers, servers and many other applications. Ultra-Scale Integration has been a goal of

MonolithIC 3D Inc. Announces Ultra-Scale Integration Scheme Read More »

ALT, Inc. Introduces High-Efficiency Monolithic LED Driver Technology

Leave a Comment / News /

Santa Clara, CA (PRWEB) May 03, 2012 Advanced Lighting Technologies, Inc. (ALT) proudly announced the achievement of a high-efficiency and highly reliable LED lamp driver solution (LED driver) comprising no bulky, unreliable components such as capacitors, coils or EMI filters. Unlike the few other companies announcing similar products, ALTs target is to offer an ultra

ALT, Inc. Introduces High-Efficiency Monolithic LED Driver Technology Read More »

MonolithIC 3D Inc. Announces Yield Repair Scheme for Wafer-Level 3D-ICs

Leave a Comment / News /

San Jose, California (PRWEB) January 24, 2012 One of the commonly quoted challenges for wafer-level 3D-IC stacking is yield. When multiple wafers are stacked atop each other, yield of that 3D stack has the potential to reduce exponentially. For example, when four wafers with 70% yield are stacked atop each other, the net yield could

MonolithIC 3D Inc. Announces Yield Repair Scheme for Wafer-Level 3D-ICs Read More »

MonolithIC 3D Inc. Announces Milestone with Website and Blog

Leave a Comment / News /

San Jose, CA (PRWEB) March 21, 2012 MonolithIC 3D Inc., a Silicon Valley start-up specializing in practical monolithic 3D IC technology, announced today that the companys website has reached more than 2,000 visits in a single week. Starting from an average of 300 visits in March, 2011, the site has now captured the attention of

MonolithIC 3D Inc. Announces Milestone with Website and Blog Read More »

Scroll to Top