About: Ibrar Ayyub

DESCRIPTION A small PCB designed to attach to the backside of the FLIR Boson Thermal Camera. The PCB facilitates configuration of the camera along with capturing data to an SD card. This project is mostly an exercise in project-based learning. Instead of researching and reading about FPGAs, I want to create a project actually using […]

Avalue recently announced a Linux-friendly 3.5″ ECM-CFS Single Board Computer with a choice of Intel’s latest 8th Gen “Coffee Lake” S-series processors. It also features triple display support, 2x GbE, 4x USB 3.1, 2x SATA, and mSATA. This SBC is considered as the world’s first 3.5-inch SBC to feature Intel’s 8th Gen “Coffee Lake” processors. Avalue’s 146 x 101mm ECM-CFS […]

Three open-spec SBCs have been launched on Indiegogo. They are the RK3399-based Khadas Edge SBC, a new Edge-1S model that uses the AI-enhanced RK3399Pro SoC and an Edge-V model that replaces the Edge’s MXM3 connector with 40-pin GPIO and adds MIPI-DSI and -CSI. Shenzhen Wesion’s Khadas project exhibited the Khadas Edge SBC in July, which runs Linux or Android on Rockchip’s hexa-core RK3399 […]

Process computer designs usually start out with an accelerometer. As reliability problems creep in, making the switch to a more “professional” solution is beneficial. Accelerometers are based on the MEMS principle: instead of being a purely solid-state affair, the inside of the chip contains a micromechanical motion sensor along with a small mass. In addition […]

Sold in the market potency heat settings with TRIAC 220v temperature-controlled soldering iron more advanced version control AT89C2051 microcontroller is provided by heat setting 2 button is made with indicators, one for led display… Electronics Projects, 220V Soldering Iron Temperature Control with AT89C2051 LED Display “avr project, microcontroller projects, “ Sold in the market potency heat settings with TRIAC […]

It provides a very compact solution to evaluate the performance of the STSPIN820 stepper motor driver with a minimum set of additional equipment and without the need of additional devices. The hardware is fully compatible to be used together with RAMPS or other similar FFF 3D printing platforms, representing a very fast drop-in replacement of […]

Gyrfalcon DevKit Simplifies Edge AI, Providing a complete suite of hardware and software tools for AI Model Creation. Gyrfalcon Technology Inc. (GTI), the world’s leading developer of low-cost, low-power, high-performance Artificial Intelligence (AI) processors from Edge to Cloud, today announced its DevKit, a set of development resources which makes it possible for smaller companies to […]

Adding wireless charging to furniture and other consumer goods is a nice way to add some oomph to an otherwise boring product. NXP’s NXQ1TXH5 provides an interesting, albeit difficult-to-prototype way around the problem. Creating a Qi-compatible is as easy as assembling the example circuit shown in figure one. From a technical point of view, the […]

In each electronic device in one form or another there is a power supply unit (PSU). Of course, because no one will work for free. Before connecting to the circuit, it would be nice to see how the PSU works at different loads. Personally, I am not inspired by the search for a set of different-sized resistances […]

Reutlingen/Munich, Germany – At electronica Munich, Bosch Sensortec announces the BHI160BP, the industry’s first Position Tracking Smart Sensor that utilizes integrated inertial sensors to improve GPS location tracking. Always-on position tracking When used with a GPS or GNSS module, the BHI160BP enables users to take full advantage of pedestrian position tracking with up to 80% saving in system […]