STEP 1: Circuit Diagram LCD other Pin’s 1,2,3,15,16 as usual not shown. Temperature Sensor (LM35) Circuit STEP 2: Programming Code Compile Using Codevision AVR View C Code STEP 3: Burn The Hex In ATmega8 View Hex Code (Make Sure grounds are common otherwise it will not work) ::::::For Any Help Write In Our BLOG:::::::: For […]
Temperature Sensor Using ATmega8 and display using LCD(16×2) Read More »
This is a simple color sensor using Atmega16 MCU and can sense Red ,Green and Blue color. How it works: the sensor consist from LDR sensor and RGB LED ,so when the object putted on the sensor the light that emitting from RGB LED will reflected from the object to LDR sensor and read it by ADC of ATMEGA16 as
Color Sensor using Atmega16 microcontroller Read More »
A while back I saw an EMF (Electromagnetic Field) Detector at makezine.com that used a led bargraph. I decided to modify it to use a 7-Segment LED Display! Here’s my project. Sorry I don’t have any pictures of it in use. Hopefully I can post some soon. Credit goes to Aaron ALAI for the original
Arduino EMF (Electromagnetic Field) Detector Read More »
I’ve always been interested in monitoring my local weather, and noticed the difference between what weather.com and accuweather.com think my local weather is, and what I see out the window. I also wanted better control over my heating and A/C system. As a computer and electronics nut, I’ve been playing with the Arduino Microcontroller, and
The Arduino Weather Station / Thermostat using ATmega328 microcontroller Read More »
This Instructable explains how to use a gas sensor with your Arduino. This lets your Arduino smell (and hence you program responses to) overall gas levels for a variety of nasties, including ethanol, methane, formaldehyde, and a bunch of other volatile organic compounds. My cost to make this actual device was under $100, including the
How To Smell Pollutants Read More »
I’ve been really interested in doing J4mie’s Physical Gmail Notifier ever since it came out in February. I only recently dropped into the project and got to learn a lot about python, plists, and arduino auto-reset functionality. I’m going to share what I’ve learned because I think there are lots of other people out there
Gmail and RSS Notifiers using the Arduino Read More »
It’s been only a couple weeks since I discovered Arduino, an open source microcontroller platform. I was looking for a cheap interface between my laptop and electronic circuits. Arduino with its price $35 and easy to use development environment was the best choice. So after getting my Arduino Duemilanove board and ordering some cheap components
Magnetic Levitation using the Arduino Read More »
