IQRF – a wireless technology which breaks barriers

Intelligent houses, data transfer, remote switching of lighting, these are only few examples of usage of modern technology called IQRF. A wireless data transfer usable for example to control various devices, can be in general reached by four basic ways:
IQRF - a wireless technology which breaks barriers
1) RF chip, microcontroller, development of your own SW
2) RF module
3) RF module with an operating system
4) RF module with an intelligent super-structure (layer)
Time and knowledge necessary to reach a final product at above-mentioned ways are illustrated in the following pictures:
The IQRF technology enables to use third and fourth from the above-mentioned possibilities. Probably the most interesting is the 4-th alternative, which is practically immediately usable with a minimal effort by means of a so called PDA protocol (Direct Peripheral Addressing). DPA is a protocol enabling to create, control and modify even large wired and wireless networks and bi-direct data transfer without a (classic) programming. DPA protocol consists of 4 bytes (3+1) containing an address in a network (NAdr), peripheral number (PNum), a command specific for a given periphery (PCmd) – for example switching of an LED and alternatively also the 4-th byte – data (up to 58 bytes/1 packet). For various peripherals, it is possible to define a so called Hardware profile (HWP), which translates a given DPA packet to a specific action of a given device (for example after pressing a push-button a packet will be sent to a destination device with information to switch on the light).
The basis of the whole IQRF system is the miniature RF transceiver modules working on the 868 MHz frequency (alternatively 916 MHz) with an ultra low power consumption and adjustable RF power. All setting and routing of the IQMESH network runs automatically, literally by “one click” and the data transfer itself functions on the principle of transmission from one module to another, until the given information reaches a destination transceiver (Node).
 
For more detail: IQRF – a wireless technology which breaks barriers


About The Author

Ibrar Ayyub

I am an experienced technical writer holding a Master's degree in computer science from BZU Multan, Pakistan University. With a background spanning various industries, particularly in home automation and engineering, I have honed my skills in crafting clear and concise content. Proficient in leveraging infographics and diagrams, I strive to simplify complex concepts for readers. My strength lies in thorough research and presenting information in a structured and logical format.

Follow Us:
LinkedinTwitter

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top