Devices

Analog Devices’ High Performance Output Drivers Increase Efficiency of Industrial and Process Control Systems : ADI’s new output drivers offer best-in-class performance with industry’s highest level of accuracy and diagnostic capability.

Leave a Comment / News /

NORWOOD, Mass. (PRWEB) May 12, 2008 Designed to meet the growing demand for highly configurable industrial automation controllers, the new output drivers offer extensive diagnostic functionality such as fault detection and enhanced sensing capabilities that make system startup and troubleshooting easier. Integrating user-programmable current- and voltage-output capabilities, the AD5750 and AD5751 output drivers are ideally […]

Analog Devices’ High Performance Output Drivers Increase Efficiency of Industrial and Process Control Systems : ADI’s new output drivers offer best-in-class performance with industry’s highest level of accuracy and diagnostic capability. Read More »

Analog Devices Introduces Four-Channel, Single-Package Solution for Data and Power Isolation : New iCoupler

Leave a Comment / News /

NORWOOD, Mass. (PRWEB) May 20, 2008 “Delivering 500 mW of isolated power in a small, surface mount package, the ADuM540x products enable customers to put more channels of isolation into space-constrained designs at reduced cost,” said Ronn Kliger, product line director, Digital Isolation Products, Analog Devices. “For example, industrial control designers can now increase the

Analog Devices Introduces Four-Channel, Single-Package Solution for Data and Power Isolation : New iCoupler Read More »

OnChip Devices Introduces TVS Diode Arrays with the Highest ESD Protection Level Available in the Industry

Leave a Comment / News /

Santa Clara, CA (Vocus) May 31, 2008 OnChip Devices, a world leader in Integrated Passive Devices (IPD), has introduced a family of miniature TVS diodes with very high protection levels from electrostatic discharge (ESD). The ESD2200 device safely dissipates ESD strikes of ?30kV contact discharge, well beyond the maximum requirements of the IEC 61000-4-2 international

OnChip Devices Introduces TVS Diode Arrays with the Highest ESD Protection Level Available in the Industry Read More »

Analog Devices’ Inertial Sensor Reduces Cost and Complexity of Industrial Motion Control Designs : – ADI’s ADIS16365 sensor offers 50 percent better bias stability and 20 percent more power efficiency, while reducing implementation time for high-end navigation systems by up to one year.

Leave a Comment / News /

NORWOOD, Mass. (PRWEB) June 9, 2008 Improved GPS Navigation   The ADIS16365 can be used anywhere high-performance motion control and feedback is required. In vehicles that rely on GPS satellite navigation to maintain accurate position information, such as high-end agricultural equipment, the IMU enhances their performance by immediately detecting small shifts in the position of

Analog Devices’ Inertial Sensor Reduces Cost and Complexity of Industrial Motion Control Designs : – ADI’s ADIS16365 sensor offers 50 percent better bias stability and 20 percent more power efficiency, while reducing implementation time for high-end navigation systems by up to one year. Read More »

Analog Devices’ 120-Milliwatt ADC Driver Features Industry’s Best Distortion Performance and Lowest Power Consumption at 70 MHz : New differential amplifier drives 14- and 16-bit ADCs in communications and high-speed instrumentation applications

Leave a Comment / News /

NORWOOD, Mass. (PRWEB) June 11, 2008 The ADA4939 can be used in either differential-to-differential or single-ended-to-differential configurations. An internal common-mode feedback loop allows the user to independently adjust the ADA4939 output common-mode level to match the input common mode voltage of the ADC, and at the same time achieve exceptional output balance and suppression of

Analog Devices’ 120-Milliwatt ADC Driver Features Industry’s Best Distortion Performance and Lowest Power Consumption at 70 MHz : New differential amplifier drives 14- and 16-bit ADCs in communications and high-speed instrumentation applications Read More »

Analog Devices’ RF Power Detection Technology Raises Performance Threshold for Cell Phones and Wireless Base Stations : ADI’s ADL5502 crest-factor RF power detection IC enables cell phone designers to extend battery life and better process complex 3G and 4G signals, while the ADL5513 logarithmic amplifier delivers a wider range of power level detection and control for Tx/Rx designs.

Leave a Comment / News /

NORWOOD, Mass. (PRWEB) June 16, 2008 Crest-Factor RF Detector Extends Cell Phone Battery Life by 20 Percent   The ADL5502 is the industry’s first dual-function RF detector in a single package that combines an RMS detector with an envelope detector to facilitate the crest-factor measurement of complex signals. Accurate power measurement and crest-factor calculation allows

Analog Devices’ RF Power Detection Technology Raises Performance Threshold for Cell Phones and Wireless Base Stations : ADI’s ADL5502 crest-factor RF power detection IC enables cell phone designers to extend battery life and better process complex 3G and 4G signals, while the ADL5513 logarithmic amplifier delivers a wider range of power level detection and control for Tx/Rx designs. Read More »

Encirq DeviceSQL Embedded Database SDK, Optimized for Blackfin Processors from Analog Devices : DeviceSQL on Blackfin improves efficiency and performance while accelerating software development in a wide range of applications

Leave a Comment / News /

BURLINGAME, Calif. & NORWOOD, Mass. (PRWEB) June 16, 2008 Encirq began shipping DeviceSQL for Blackfin on June 1, 2008. The software has been developed and tested on the Analog Devices ADSP-BF548 EZ-KIT Lite development platform so developers can rapidly build a variety of applications using DeviceSQL with the EZ-Kit Lite platform. Products based on Blackfin

Encirq DeviceSQL Embedded Database SDK, Optimized for Blackfin Processors from Analog Devices : DeviceSQL on Blackfin improves efficiency and performance while accelerating software development in a wide range of applications Read More »

Analog Devices Introduces High-Performance Analog Front End for 900 MHz Band RF Applications : The single-chip ADF9010 combines a leading edge I/Q modulator with a low noise synthesizer, including on-chip VCO, without compromising the performance of individual RF blocks; significantly lowers system costs and greatly reduces time-to-market

Leave a Comment / News /

NORWOOD, Mass. (PRWEB) June 16, 2008 Analog Devices will showcase the ADF9010 this week at the 2008 International Microwave Symposium in Atlanta, Georgia (Booth #1743), together with other innovations from ADI’s broad RF portfolio including PLL and DDS synthesizers, clocks and timing ICs, RF amplifiers, demodulators, RF detectors and more.   More about the ADF9010

Analog Devices Introduces High-Performance Analog Front End for 900 MHz Band RF Applications : The single-chip ADF9010 combines a leading edge I/Q modulator with a low noise synthesizer, including on-chip VCO, without compromising the performance of individual RF blocks; significantly lowers system costs and greatly reduces time-to-market Read More »

Analog Devices Adds Direct Conversion Receiver Solution for Next Generation Cellular and Broadband Wireless to RF Portfolio : – Demodulator and dual-channel digital gain trim amplifier reduce component count up to 60 percent.

Leave a Comment / News /

NORWOOD, Mass. (PRWEB) June 16, 2008 With the ADL5380 demodulator, base station receivers can be designed for a variety of cellular and broadband wireless data systems and standards including CDMA, W-CDMA, TD-SCDMA, PHS, LTE, and WiMAX. The ADL5380 is also an ideal solution for defense and avionics equipment, including software-defined radio, due to the broad

Analog Devices Adds Direct Conversion Receiver Solution for Next Generation Cellular and Broadband Wireless to RF Portfolio : – Demodulator and dual-channel digital gain trim amplifier reduce component count up to 60 percent. Read More »

Tecme Selects Vector Software for IEC 62304 Compliance of Safety Critical Devices

Leave a Comment / News /

Providence, RI (PRWEB) November 01, 2011 Vector Software, the leading provider of dynamic software test tools for embedded systems, announced today that Tecme S.A. has selected VectorCAST for automated unit, integration, and regression testing of its Neumovent Mechanical Ventilator applications.   With over 40 years of dedication and research into mechanical ventilation and sales and

Tecme Selects Vector Software for IEC 62304 Compliance of Safety Critical Devices Read More »

Scroll to Top