Introduction This microcontroller project shows how to build a dual digital thermometer using an ATmega8515 and two DS18B20 temperature sensors in Proteus simulation. The system reads temperature from both sensors, displays the live values on a 16×2 LCD, and also keeps track of minimum and maximum readings. It is a practical example of embedded systems […]
Dual Thermometer using ATmega8515 with Proteus Simulation Read More »
Introduction The DigiThermo is a device designed for measuring time and temperature used in chemistry laboratory. The circuit of Digithermo employs a 89C4051, 20-pin CMOS Microcontroller with built-in 4kB code memory. Temperature was measured by LM35D, National Semiconductor Temperature sensor producing 10mV/°C. The CA3162, 3-digit DVM converts dc output provided by LM35D and sends BCD
DigiThermo 0-100.0 °C using AT89C4051 Read More »
This instructable will show you how to make a thermometer that displays the temperature of the air. It’s not the most accurate thermometer in the world, but for this price and the fact that it was homemade… This instructable will show you how to make a thermometer that displays the temperature of the air. It’s
DIY Digital Thermometer Using ATMega8 Read More »
