In this project i have interfaced an GPS with AVR microcontroller, the ATtiny2313 gets the location from the GPS and display it over the LCD display. This project also have the feature of marking a place with its name. For entering the Name of the place i have used the PC-AT Keyboard. At starting the […]
This projects gives you a simple wav player with help of the MMC card connected to ATmega32. You can use any AVR microcontroller. The MMC card works on 3.3v so a 3.3v regulator is used and the 5v to 3.3v level conversion is done by the combination of resistors. The LF33CV is used for the
Description This board can directly connected to the STK 500 board or the ATTiny2313 ISP program board with a 10 pole flatcable on the 10 pin header of the STK500 and the 10 pin header of the LCD/Switch board. The display has 16*2 character positions and is Hitachi HD44780 compatible, and also has a LED
This project can measure the clock pulses fed to the Timer input of the AVR microcontroller. The Bascom code counts the clock pulses for 1 second and display it over the LCD display. The frequency is displayed in Hertz and this project can measure a frequency of max 8mhz. Circuit Diagram For more Detail: 8
This project gives you a simple temperature controlled fan. If the difference between real temperature and the user temperature is high then the fan will run at full speed and if the difference is low then the fan will rotate at slow speed. The speed of the fan varies with the temperature. The user can
Temperature controlled fan using PWM microcontroller Read More »
There are lot of temperature sensors both with analog & digital outputs. This project gives you an another temperature indicator which has been done with a digital sensor SMT160. Although it is a digital sensor it does not gives out the temperature directly. The output is duty cycled modulated. The sensor can measure temperature from
Here’ s an melody player with Atmega16. The command “Sound Speaker” is used to generate sound. This is the inbuilt command in Bascom AVR. For more Detail: Digital Melody player using atmega16 microcontroller
Digital Melody player using atmega16 microcontroller Read More »
Description This EEPROM programmer reads, writes and erases I²C 24C EEPROM devices. It has a PC serial port interface. The programmer needs 5VDC power supply. It can read or write one page (16 bytes) at a time by programming the page with a terminal program such as hyperterminal, no external software is needed to read
I2C EEPROM Programmer With AT2313 microcontroller Read More »
With this project you can control a unipolar stepper motor. You can control both the speed and the direction of the motor. The speed and direction and can changed with help of the keypad. The data’s are displayed over the LCD display. A 4×4 keypad is used for entering the speed and selecting the direction.
Here’s a simple calculator with the Atmega16 microcontroller. It have an LCD display and a 4×4 keypad. You can also download the proteus simulation file on the downloads Bascom Code $regfile = “m16def.dat” $crystal = 1000000 Config Kbd = Portd , Debounce = 30 Config Lcd = 16 * 2 Config Lcdpin = Pin ,
Simple calculator using avr microcontroller Atmega16 Read More »
