This tutorial series designed specifically for beginners. If you are a beginner looking to play with cool electronic stuff, then you are going to find this very useful. This AVR tutorial for beginners series is going to cover all the information about microcontrollers. I will also focus on projects and together, we will make various […]
AVR Tutorial for Beginners Read More »
Introduction The Utah State University (USU) Materials Physics Group (MPG) is interested in the performanceof Commercial Off the Shelf (COTS) microcontrollers in space conditions. Microcontrollers are commonlyused on CubeSats, small relatively inexpensive satellites that are flown in Low Earth Orbit (LEO) ataltitudes of ~160 km-2000 km. There is a large area of interest in COTS
Microcontroller Survivability in Space Conditions Read More »
An interesting project and already much discussed in the forums and also in videos.Although it appears complex,it is a simple idea and fun very purpose. Mounting material: – 27 LEDs matte– Microprocessor ATmega8– Electrolytic capacitor 47UF 16V– Veroboard– Small wood board at the minimum 10x10cm– 50 cm wire tinned (excuse me, I’m portuguese and my
LED Cube 3x3x3 With ATMEGA8 Read More »
Ok first of all this was a final project for my microprocessor course in my University, and its intended to clarify and guide to someone has a similar project or just want to do it and learn , since when i was doing this project it wasn’t so easy to find the information and examples
Car Datta Logger Using OBD II Protocol (atmega 2560+ SD Card + Lcd 16×2) Read More »
In my previous Instructable I showed how simple commands could be used to turn on a microprocessor output and light an LED. https://www.instructables.com/id/Lets-Program-a-PIC… I should stress I am not connected with Picaxe and these projects are ones I used in School to teach programming to school kids. In the last instructable the circuit was built
Reading Sensors With a Microprocessor. Read More »
So you wana learn how to programme a micro controller? This tutorial has been designed as a next step, following the fantastic tutorial ‘Ghetto Programming: Getting started with AVR microprocessor on the cheap.’ by The Real Elliot link you should read this before progressing onto this next step. Today my friends we are going to make a
Micro Controller Programming: Making a Set of Traffic Lights Read More »
Hi There Everyone, This is Tahir Ul Haq and introduces you to another member in the family. This time the project is named as Weather Monitoring System. This is another TIVA based project presented by students of UET LHR. Weather monitoring plays an important role in human life, so the collection of information about weather
Weather Monitoring System Using TIVA Read More »
The instructable created by me will help you to build a huge memory capactiy which will come in handy for many projects and measurements. The memory card is suitable for multi-usage and can be way more realaiable in comparison to flash cards and other type of soft memory. The life span of those CMOS EPROM’s
Memory-Card Made of CMOS EPROM’s Read More »
The KIM Uno is a portable, software defined dev kit for (retro) microprocessors. But let me introduce the idea of it by going back in time: Back in late 2018 it came to my mind, that I wanted to build a small portable microprocessor dev kit, just like the famous KIM-1 from MOS Technology, Inc. and designed by Chuck
The KIM Uno – a 5€ Microprocessor Dev Kit Emulator Read More »
This instructable shows how to control a group of led’s with one microprocessor output. The micro I will be using is an Atmel Attiny2313. Step 1: Parts and Tools Parts:Attiny2313 (got 5 free samples from Atmel)20 pin socketResistors (any size will work, depending on your setup. I will explain later)5v regulator (any will work, I’m
Control Anything With One AVR Pin Read More »
