Texas Instruments TLV767 Precision Positive Voltage Linear Regulators are a wide input linear voltage regulator that supports an input voltage range from 2.5V to 16V and up to 1A of load current. The output range is from 0.8V to 6.6V or up to 13.6V in the adjustable version. Additionally, the TLV767 has a 1% output accuracy that can meet […]
TEXAS INSTRUMENTS TLV767 POSITIVE VOLTAGE LINEAR REGULATORS Read More »
Texas Instruments released the TPS62912 and TPS62913 family of low-noise DC/DC switching regulators with integrated ferrite-bead compensation. They offer low noise of 20 µVRMS for frequencies ranging from 100 Hz to 100 kHz and ultra-low output-voltage ripple of 10 µVRMS. Traditional low-noise power supply architectures include such technology like DC/DC converters, low-noise LDO, and an off-chip filter, like a ferrite bead. Integrating ferrite-bead
TI RELEASE TPS62912, TPS62913 FAMILY OF LOW-NOISE DC/DC SWITCHING REGULATORS Read More »
Engineers can shrink their power solution by as much as 80% and maximize efficiency in high-voltage industrial applications with a new high-density, isolated DC/DC bias power supply. Texas Instruments (TI) introduced the first integrated circuit (IC) developed with a new proprietary integrated transformer technology: a 500-mW high-efficiency isolated DC/DC converter with the industry’s lowest electromagnetic interference (EMI), the UCC12050.
The LT8650S 42 V, dual-channel, 4 A synchronous Silent Switcher® 2 regulator features a wide input voltage range of 3 V to 42 V, ideal for automotive, industrial, and other step-down applications. Its quiescent current is only 6.2 µA with the outputs in regulation – a critical feature in automotive environments where always-on systems can drain the battery even when the
DUAL-CHANNEL, 42 V, 4 A MONOLITHIC SYNCHRONOUS STEP-DOWN SILENT SWITCHER 2 Read More »
In electronics, linear voltage regulators are commonly used to stabilize voltages. Regardless of the input voltages or load conditions, they will provide fixed output voltages, thus protecting devices from fluctuating outputs, which can cause inefficient performance or even damage. When designing a power supply for an application that requires a small difference between its input
THE TOP 10 LINEAR VOLTAGE REGULATORS ACCORDING TO SNAPEDA Read More »
1A DC/DC switch-mode regulators TRACO TSR-1 already found their stable place on the market and they successfully replace inefficient linear regulators. Switch-mode power supplies are still more used in all segments of power supply, to which also belongs a regulation on the side of the load (Point Of Load – POL). Perhaps every designer is
Try the effective replacement for standard 78xx regulators Read More »
The TinyCircuits TinyDuino is an Arduino compatible board in an ultra compact package. Imagine the possibilities of having the full power of an Arduino Uno in a size less than a quarter! Each module in the TinyDuino family has been optimized to include only the core circuits for it’s specific function to keep the size as low as possible at the best possible price
TinyDuino – Arduino Compatible Boards Smaller Than a Quarter! Read More »
MALVERN, Pa. (PRWEB) August 5, 2005 Vishay Intertechnology, Inc. (NYSE: VSH) today announced two new 150-mA low-noise low-dropout (LDO) regulators with the highest available current density in the small five-pin SC-70 package. Their extremely small 2 mm by 2 mm footprint makes them well-suited for use in battery-powered equipment such as cell phones, PDAs, pagers,
NORWOOD, Mass. (PRWEB) August 29, 2008 “Many lithium-battery-powered devices require voltage rails in the 2.8-V to 3.6-V range for RF, audio, or motor applications. The ADP2503 and ADP2504 are ideal regulators to provide these voltages when board area and efficiency are important,” said Arcadio Leon, marketing director for portable power products, Analog Devices. Proprietary
Sunnyvale, Calif. (PRWEB) October 26, 2003 Catalyst Semiconductor (Nasdaq: CATS) has added shunt voltage regulators to its mixed signal product line. The CAT431L is a precision 1.24 volt shunt regulator featuring 0.5 percent accuracy. The CAT102 is a precision 0.6 volt shunt regulator. Output voltage for both regulators can be set with external resistors.
CATALYST SEMICONDUCTOR VOLTAGE REGULATORSTARGET POWER SUPPLY MARKET Read More »
