Introduction This microcontroller project demonstrates how to draw bitmap images on a TFT LCD using an ATmega328P-based Arduino AVR setup. The image file is stored on an SD card and loaded directly onto the display through the SPI interface. It is a useful Proteus simulation for learning how SD card storage, TFT LCD control, and […]
Bitmap Drawing on TFT LCD using ATmega328P with Proteus Simulation Read More »
Researchers from the Smart Management of Infrastructure Laboratory (SMILab), located in the Center for Advanced Research Computing, have developed a new strain sensor as a part of the Low-Cost Efficient Wireless Intelligent Sensors (LEWIS) project. The new sensor, called the LEWIS-S, is easy to use, wireless, and can be offered at about 5% of the cost of
SMILab develops new low-cost strain sensor Read More »
Ok first of all this was a final project for my microprocessor course in my University, and its intended to clarify and guide to someone has a similar project or just want to do it and learn , since when i was doing this project it wasn’t so easy to find the information and examples
Car Datta Logger Using OBD II Protocol (atmega 2560+ SD Card + Lcd 16×2) Read More »
I have a pretty cool workplace where we’re all about fun pranks. One of the programmers I sit next to has a habit of banging on his desk a lot when he is frustrated. I decided it would be a fun prank to hook up a LinkIT ONE and some sensors to his desk to
In this instructible, I will guide you through the use of the WF32 as an HTTP server that hosts a website that can be used to control servos and a stepper motor. The purpose of this was to create an iPad mount that allowed users to log in from a remote location and point the
Remote IPad Mount Control Using WF32 Read More »
Digital Photo Frame TFT ATmega128 TFT source C code of practice are used to SPFD5408 TFT LCD 3.2 inch 320 × 240 size images displayed in the SD card. Source: ourdev.cn/ Digital Photo Frame… Electronics Projects, TFT LCD Digital Photo Frame ATmega128 SD Card TSC2046 “avr project, microcontroller projects, “ Digital Photo Frame TFT ATmega128 TFT source C code
TFT LCD DIGITAL PHOTO FRAME ATMEGA128 SD CARD TSC2046 Read More »
This library implements an SD card Data Logger that runs on ATmega. It has a small footprint, so it can be loaded on an ATmega8, leaving space for user code. It supports SD and microSD cards formatted with FAT16. It also features log rotation.The “Petit FAT File System Module” by ChaN (http://elm-chan.org/fsw/ff/00index_p.html) it is used to write
SD card logger library with log rotation that fits on ATmega8 Read More »
This project explains how to interface the SD card with an AVR microcontroller. In this project an ATMEGA16 microcontroller is used. The microcontroller runs on 5V power supply with a built in crystal frequency of 8 MHz. A 2GB SDSC card from Transcend is used in this particular project, but the code will work with most of the SD
Interfacing SD Card with AVR Microcontroller Read More »
Ok first of all this was a final project for my microprocessor course in my University, and its intended to clarify and guide to someone has a similar project or just want to do it and learn , since when i was doing this project it wasn’t so easy to find the information and examples
Car datta logger Using OBD II protocol (atmega 2560+ SD card + lcd 16×2), lcd Read More »
Introduction This project implements a high speed data acquisition system using Mega32 microcontrollers and a Controller Area Network (CAN). Recording data is essential to testing and developing a racecar. Recording what each sensor is doing can tell an engineering how the car is performing, and most importantly, how to make it faster. A well outfitted
Data Acquisition System With Controller Area Network and SD Card Using Atmega32 Read More »
