The STTS22H temperature sensor from STMicroelectronics offers high accuracy with low operating and standby current and flexible operating modes. By Gina Roos @ electronicproducts.com
STMicroelectronics has launched its STTS22H temperature sensor with typical temperature-reading accuracy of 0.25°C and low operating and standby current. The device enhances temperature and heat-flow monitoring in asset trackers, shipping-container loggers, HVAC systems, air humidifiers, refrigerators, building-automation systems, and smart consumer devices.
The STTS22H is I2C and SMBus 3.0 compliant, and supports flexible operating modes including configurable output data rate (ODR) down to 1 Hz, a power-saving one-shot mode, and an interrupt pin that supports SMBus alert response address (ARA). This allows the sensor, as an SMBus slave, to signal the application if a user-programmed upper or lower temperature threshold is exceeded, said STMicroelectronics. Programmable I²C/SMBus slave addresses allow up to two STTS22H sensors to share the same bus.
The device offers very low power consumption. It draws only 2.0 µA at 1 Hz ODR and 1.75 µA during periodic one-shot measurements, which extends the runtime of battery-powered devices. In standby mode with the serial port inactive, the STTS22H draws only 0.5 µA (typical). In addition, the 1.5-V to 3.6-V operating-voltage range allows use with various power sources such as a small lithium cell.
Read more: TEMPERATURE SENSOR ACCURATE TO 0.25°C