About: Bilal

Barely a week after Lattice semiconductor announced the launch of the CrossLink-NX family of FPGA, Greg Davill, in his amazing way of posting the entire development process in a twitter thread, has announced the launch of a development board based on the Lattice Crosslink-NX 72QFN. The new board which is called the ArcticKoala was created using some of the sources from recent FPGA tools like […]

Axiomtek – a world-renowned leader relentlessly devoted in the research, development and manufacture of series of innovative and reliable industrial computer products of high efficiency – is pleased to introduce the GOT115-319, a 15-inch fanless touch panel computer with a thickness of only 50 mm for used in space-constrained environments. It is powered by the Intel® Celeron® processor […]

In this instructable I’m going to how you how to measure the temperature using a Linkit One and a Lm35 temperature sensor. This project can be a part of a wireless weather monitor, if you have not seen my previous instructables please check it out, I have a lot of other Linkit One tutorials. Step […]

AAEON’s UP project has launched an edge computing enabled kit called the UPX Edge. The system which was developed to power industrial automation, robotics, AI, and IoT applications, is built around the Intel 8th Gen Whiskey Lake-U based UP Xtreme board and comes preloaded with an Ubuntu 18.04 image based on Linux kernel 5.0 It was initially available on Kickstarter […]

In this instructable I’m going to show you how to design a kitchen timer using the Linkit One, the timer has a maximum duration of 30 minutes. And once the timer is done counting down it fires a buzzer to notify you. The time interval can be set in steps of 5 minutes and each […]

Researchers at Stanford University have demonstrated the acceleration of electrons through what they describe as an “On-chip integrated laser-driven particle accelerator”, detailed in a recent paper published in the Science journal. by Tom Abate On a hillside above Stanford University, the SLAC National Accelerator Laboratory operates a scientific instrument nearly 2 miles long. In this […]

At the moment I’m living in a block of flats and my mailbox is in a central lobby area. I’m often receiving small surprise packets from China and never know when the postman has been, usually between 8 and 12, sometimes even twice a day! I also don’t have any road facing windows that I […]

This DC Motor Multiplexer allows you to control up to four DC motors in forward and reverse using one MOSFET and only 5 digital pins. For this intractable you will require: – DC motors (I used salvaged DC fans)– MOSFET (I used a 110v 30amp make sure it is rated for more than your combined […]

Printed Circuit boards are an important part of the development of any electronics product. They provide an easy, neat and repeatable ways of connecting components together. Thus, ensuring quality from their design to production is so critical that, failure at any point in the process could lead to a lot of money going to waste […]

Being one of the frontrunners in AI development and having an understanding of the potentials and opportunities in Edge Computing and Local AI, Google started its sojourn into the provision of hardware components and companion software tools for the development of Local AI products last year, with the launch of the Coral Platform. The platform which comprises hardware […]