About: Bilal

INTRODUCTION Hi guys am a 3rd Year University Student of Lovely Professional University, India currently pursuing Electronics and Communication Engineering. Youtube Channel :::: https://www.youtube.com/channel/UC6ck0xanIUl14Oor… Facebook Profile :::: https://www.facebook.com/arnab.das.bwn GitHub :::: https://www.facebook.com/arnab.das.bwn WordPress :::: https://www.facebook.com/arnab.das.bwn This Project is Based on Atmel’s Atmega16 Microcontroller as the main brain for computation. NRF24L01+ Wireless communication module is used for the Wireless data transmission. Today we have […]

Okay, I admit I don’t have a monkey. But would you be looking at this if I didn’t mention monkey? And this would work for a monkey. Does your monkey or dog wander off? Would you like to see where he/she is? Well, they make dog trackers (see picture). However, most are over $100 and […]

Create your own Interactive LED Beer Pong Table! This instructable will guide you through all of the steps to in order to create a one-of-a-kind beer pong table complete with cup detecting RGB pods, automatic ball washers, a 32×12 ping pong ball LED grid, side LED rings for spectators and an RF interface to communicate […]

Have you ever been anxious to receive your new break-out boards, only to find out that the pin layout is not breadboard friendly? If only those pins were aligned differently. Well, let me show you how I have made an easy breadboard adapter that will fit the nRF24 or ESP8266 boards. No modifications or soldering […]

While this is not the first Arduino based GPS Data Logger out there, it may be the most versatile. This device has a lot of features & even more possible uses. It started with significant inspiration from Mikal Hart’s “Reverse Geocache”TM and the use of his TinyGPS library. Jeremy Blum’s Tutorials also helped us on […]

In this instructable we will learn how to control Daikin air-conditioner from any point in the world using Losant IoT Enterprise Platform and their amazing UI dashboard The ESP8266 is a low-cost Wi-Fi chip with full TCP/IP stack and MCU (microcontroller unit) Step 1: How It Works The microcontroller (ESP8266) connects Losant IoT platform and waits for […]

Using an ESP32 or ESP8266 we can forecast weather by reading air pressure from a sensor such as the BOSCH BMP085/180 or BME280. Then by monitoring the changes in air pressure and categorising the changes thus:  Rising quickly  Rising  Rising slowly  Steady  Falling slowly  Falling  Falling quickly And […]

This is a sonic (sound-based), pocket-size measuring tool, accurate up to 3mm. It is useful for applications where you want to log the distances or find distances that are inaccessible, therefore measuring tapes, rulers, and callipers are out of the question! Since the ESP32 is such a tiny micro controller powered by a micro usb […]

This is the simplest motor driver that could possibly be built using only one NPN transistor, which is controlled and driven by the ESP32 micro controller board. Step 1: Materials and Tools ESP32 Microcontroller DC motor NPN Transistor — BC337 100Ω resistor Diode — N4148 General Purpose Breadboard wires Breadboard’ 2x jumper wire Step 2: […]

In this indestructible I will demonstrate how to make your Own Solar power Monitoring station .With materials ,Code and electronics parts. we will start with the PCB designed on a fritzing program to sending off for the PCB ,Soldering it and Installing it into a junction Box , then we will Build the solar Junction […]