About: Bilal

Würth Elektronik has developed a micro-electro-mechanical system (MEMS) sensor only 2 × 2 × 0.9 mm in size. Thanks to its low energy requirement and its calibrated and temperature-compensated digital output, the sensor measures humidity and temperature with long-term stability. ‘ The WSEN-HIDS humidity sensor is based on advanced MEMS technology: A dielectric polymer absorbs or releases water molecules […]

Two control loops, run in order A single-cell charger is a current source that becomes a voltage source. Below the float voltage it holds the programmed current and the cell voltage climbs; at the float voltage the loop switches to constant voltage and holds it, and current falls as the cell fills. The cycle ends […]

A campaign for a new set of lithium rechargeable batteries has been launched on Kickstarter called Solarcell. Solarcell is the latest of Lithium rechargeable batteries with a USB-C connection that offers a high power capacity and is extremely safe. There’s a large selection of battery models to help you power up any of the devices you own and […]

Introduction AVR Studio 4 is a user-friendly Integrated Development Environment (IDE) designed for debugging AVR software. It offers chip simulation and in-circuit emulation capabilities for the AVR microcontroller family. The user interface is intuitively designed to provide comprehensive information and is suitable for both simulation and emulation, enabling users to quickly grasp its functionalities. Getting […]

This tutorial provides step-by-step instructions on how to integrate an external programmer into Atmel Studio 7.0. By setting up the external programmer, you will be able to flash the AVR board directly from Atmel Studio without the need to switch to the “Universal_GUI.exe” application. This streamlined workflow enhances the debugging and troubleshooting process, resulting in […]

Introduction To align with the current trend of incorporating networking capabilities into everyday devices, our project incorporates a webpage interface for the Atmel AVR microcontroller. Initially, one of our main objectives was to develop a low-level network interface for the Atmel device, which involved controlling an ISA network card (as seen in the eAVR Project) […]

MPS’ 2.75 V to 17 V, 6 A, 1.2 MHz module is ideal for applications such as industrial equipment MPS’ MPM3650 is a fully integrated, high-frequency, synchronous rectified, step-down power module with an internal inductor. It offers a very compact solution to achieve 6 A of continuous output current over a wide input range with excellent load […]

Introduction The objective of this project is to develop an affordable wave player that utilizes AVR (ATmega / ATiny Series) technology and offers CD-Audio quality. This wave player is capable of playing standard RIFF (Resource Interchange File Format) wave files in 8-bit/16-bit Mono/Stereo formats. The application potential for this project is extensive, including its use […]

Elitegroup Computer Systems (ECS), the global leading motherboard, Mini-PC, Notebooks, mobile device and smart city solutions provider, is proud to present the latest light and thin mini PC – LIVA M300-W . LIVA M300-W is designed by iron grey metal chassis with compact size measuring only 12.8 x 12.8 x 2.6 cm. LIVA M300-W is powered by […]

USB has evolved over the last few years with the latest launch of the ST’s standalone VBUS-based controller. To help build a compact and efficient power adapter that provides up to 27W with zero-power operation when no cable is connected, STMicroelectronics has unveiled a new reference design with Programmable Power Supply (PPS). All new ST’s STEVAL-USBPD27S solution introduced […]