About: Ibrar Ayyub

This project is a 5.5W – 2 Channel Audio Amplifier based on LA4445 IC. DESCRIPTION The small 2 Channel amplifier constructed around Sanyo’s LA4445 IC delivers 5.5Watts +5.5 Watts at 4 ohm load, supply in 12V DC 2Amp, Input impedance 30K. SPECIFICATIONS Dual Channels output : 5.5W Minimum External Parts Very small pop noise at the time […]

In this 8051 Robot ARM application I use for robot arm 3 stepper motor design, study and is to be informed about the expulsion. Stepping motors to provide work, applied to the ends of… Electronics Projects, 8051 Robot ARM Stepper Motor Control “avr project, microcontroller projects, “ In this 8051 Robot ARM application I use for robot arm 3 […]

For a while now, the only Snapdragon 660 based SBC known to us is the Intrinsyc’s Mini-ITX form factor Open-Q 660 HDK, focusing on mobile device development. However, Inforce has launched its $220 “Inforce 6560” Pico-ITX SBC. This SBC runs Android 8 and Ubuntu on its octa-core Snapdragon 660 and enables stereoscopic depth sensing through its dual MIPI-CSI interfaces. The 100 x 72mm SBC […]

As Internet of Things (IoT) devices are optimized for lower power consumption and affordability, most of them have poor computing resources. As consequence, these devices are more vulnerable to hacking attacks. The good news is there are several options for using cryptography to make it difficult for hackers to gain access to IoT devices of your smart […]

Device made from flexible, inexpensive materials could power large-area electronics, wearables, medical devices, and more. by Rob Matheson | MIT News Office Imagine a world where smartphones, laptops, wearables, and other electronics are powered without batteries. Researchers from MIT and elsewhere have taken a step in that direction, with the first fully flexible device that […]

Determine the power absorbed by the VCVS in the figure. Solution: The VCVS consists of an open circuit and a controlled-voltage source. There is no current in the open circuit, so no power is absorbed by the open circuit. The voltage vc across the open circuit is the controlling signal of the VCVS. The voltage […]

This application step (step) motor control, input and output ports through 8051 will examine the circuit by providing lift. We use our stepper motor circuit. As we know, certain steps of the stepper motor,… Electronics Projects, 8051 Elevator Project Stepper Motor Control “avr project, microcontroller projects, “ This application step (step) motor control, input and output ports through 8051 […]

Estone technology is proud to announce the new addition to our pico-ITX embedded board family – EMB-2238, an NXP i.MX8M based single board computer.  Building upon the success of our i.MX6 board series. The EMB-2238 is our first embedded board to integrated with hardware DSP specially designed for voice control applications, This Quad core ARM […]

Novasom M11, based on the new Intel Apollo Lake x5, 6th generation of Atom CPU with Microsoft Windows 10 are designed for the typical digital signage applications that require heavy Full HD movies or UHD (4k) to be managed with high fluidity by specific heavy SW or, often, multiple displays. These boards (with an HW […]

F&S Elektronik Systeme has unveiled its 40 x 35mm “PicoCore MX8MM” module which runs Linux on a quad-A53, 1.8GHz i.MX8 Mini with up to 8GB LPDDR4 and 32GB eMMC plus WiFi/BT, a GbE controller, PCIe, and optional -40 to 85°C support. The PicoCore MX8MM is a i.MX8M variant with lower video resolution, but a faster clock rate. The PicoCore MX8MM has the same […]