Soundbyte If you ever thought you couldn�t control things with your eyes, think again � here�s the game Snake that allows 4 modes of multi-level game play with buttons or with your eyes, using electro-ocular potential. Project Summary While brainstorming for a 476 final project that would be biomedical engineering-related, we stumbled upon the idea […]
Introduction For our final project, we used an Atmel AT90S8535 microprocessor to create a hangman game. The letters are displayed on a 16-character LCD, and are input (“guessed”) using a 16-button keypad. The 8 LED’s on the Atmel development board are used as our “hanging man” – one lights up for each wrong guess. We
Introduction Many of the simpler electronic games of the past decade can be easily programmed on the AVR microcontrollers we are using this semester, using only the lights and switches available on the evaluation boards. For our final project we programmed the game Simon using the AT90S8535 microcontroller chip and corresponding evaluation board. This is
Programming the Game Simon Read More »
Introduction The goal of our final project was to design a thermostat using an Atmel AT90S8535 microcontroller. The thermostat was to compute the current temperature once per second and then send an on/off signal to a heating device which would then regulate the temperature to a desired target temperature. In addition, the thermostat was required
A m -Controller Based Thermostat Using Atmel AT90S8535 microcontroller Read More »
Introduction Project Summary Our project is an expandable bar inventory system that implements wireless communication. The bar inventory system was an interesting project, because it involved both hardware and software together, since we are comprised of one analog designer and one computer programmer, both of whom are alcoholics. On the hardware side, there are sensors
Bar Inventory System: Drinking for Class Instead of Because of Class Read More »
Overview: We decided to build transmitter and receiver modules for a radio-controlled (RC) car, as well as implement variable-speed motor control and a continuous steering function. The simple speed controls included in most RC kits seldom offer more than three forward speeds and one reverse speed; furthermore, steering controls in most “Radio Shack” toys only
RC Car Controller Using Atmel 4414 chip Read More »
Introduction Every group wants their final project to be something that will be remembered long after they’re gone. Some do highly sophisticated and complex projects that entail upwards of a hundred hours to complete. Yet others go out of their way to develop something ‘cool’ and ‘fun’. Luke and I decided that we wanted to
Sine Wave Synthesizer Read More »
Overview: This project involves the implementation of control and monitor for dual processes. The variables monitored are pressure and temperature. The input control is a 16 button keypad and the output is monitored in a 16 character LCD The device can be widely deployed as a cheap solution to room and automobile climate control automation.
Temperature and Pressure Control using the AT90S8535 Read More »
Introduction Sound Bite The Automated Juice mixer is a juice mixing device that allows user to create desired drinks with up to four different ingredients through a user friendly interface. Summary Mixing juices can be a very tedious job. We have created a juice mixer that allow user to mix drinks with desired amount and
Automated Juice Mixer Read More »
DESCRIPTION This project is to make a clone of Arduino Leonardo in a simple way.That is why the distribution of the pin does not match the standard Arduino (have to make many jumpers on the motherboard or use both sides). However, most Arduino Leonardo characteristics are maintained. The circuit is protected by an automatic reset fuse
Leonardo Arduino clone a single-sided PCB using ATmega32U4 Read More »
