Security is a prime concern in our day-today life. Everyone wants to be as much secured as possible. Keypad based password is one of the many method and the most common and easy one to provide security to any system. In this project, we will learn How to design a password protected system using a […]
4X4 Keypad based Password with ATmega32 and LCD Display Read More »
ADXL335 accelerometer sensor is a MEMS (Microelectromechanical systems) sensor which can measure static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion, shock, or vibration. The accelerometer sensor is used in mobile devices, gaming systems, disk drive protection, image stabilization, sports devices, health devices and etc. The analog outputs are
3-axis Accelerometer Sensor-ADXL335 Interfacing with ATmega32 Read More »
In this project, we will learn How to design an Accelerometer based Hand Gesture Controlled Wheel Chair with AVR ATmega32 Microcontroller for Physically Handicapped. Here, we will use our hand gestures as input signals to drive the wheel chair in different direction and we will display the direction of movement of the wheel chair in
A digital clock is a type of clock that displays the time digitally (i.e. in numerals or other symbols), as opposed to an analog clock, where the time is indicated by the positions of rotating hands. The clock/calendar provides seconds, minutes, hours information. The clock operates in either the 24-hour or 12-hour format with AM/PM
Update to version 2014-06-13 AVR uartConfig is a small footprint library you can use to config your micro eeprom through uart communication. AVR uartConfig is a set of tools running on Windows, Linux and Mac, made up or: a avrgcc firmware library a commandline utility a gui tool Applications This library prevent you to wire
AVR uartConfig – an atmega and arduino eeprom config library Read More »
In this project, we will learn How to design an Accelerometer and Relay based Hand Gesture Controlled Wireless Home Automation System with AVR ATmega32 microcontroller using 433MHz RF. Here, we will use different hand gestures as input signal to control the appliances i.e 2 bulbs and 2 fans. Also, we will display the status of
In this project, we will learn How to design a Password Protected BT136 Triac based Keypad Controlled Wireless Home Appliances System with AVR ATmega32 microcontroller using 433MHz RF Part-I. Here, we will use the 4X4 keypad as the input device to enter the password and to control the appliances i.e 2 bulbs and 2 fans.
LM35 series is a low cost and precision Integrated Circuit Temperature Sensor whose output voltage is proportional to Centigrade temperature scale. Thus LM35 has an advantage over other temperature sensors calibrated in Kelvin as the users don’t require subtraction of large constant voltage to obtain the required Centigrade temperature. It doesn’t requires any external calibration.
LM35 Temperature Sensor Interfacing with ATmega32 and LED Display Read More »
How a generic keyboard is made has been already explained in the Atmega 32u4 Based Generic USB Keyboard Project. In this project a wireless keyboard will be designed. For making a wireless keyboard, there will be two circuits involved in the project – a transmitter circuit which will have a keypad included for getting the
Atmega 32u4 Based Wireless USB Keyboard Read More »
In the Atmega 32u4 Based USB Controlled LED Series Project, it was demonstrated how to use control transfer to receive data from computer to the peripheral. In this project, it will be demonstrated to transfer data from microcontroller to the host computer. For this, the device will be configured as HID Class Device again. An
Atmega 32u4 Based LED Status Read More »
