If you like this instructable, please vote for it! For my off-grid Ham Radio and Solar projects, I needed a way to measure volts, amps, watts, amp hours and watt hours. There’s a couple of commercial products that can do this, but not with the flexibility I wanted. I designed a Arduino micro-controller based solution […]
DIY Amp Hour Meter – Arduino Read More »
I am in the process of designing a function generator and I needed a frequency counter to check it against. This project uses a minimal number of components for a very economical and compact design. A bare-bones Arduino clone is at the heart of this project and the measured frequency is shown on an LCD
This is a open source project of RC Car with control from Android Phone via Bluetooth. The controller is used with .NET Micro Framework: FEZ Panda II, but you may use any controller works with .NET Micro Framework core (Netduino, GHI Electronics board’s and other). All source code is available at GitHub. To control the machine
CxemCAR 1 – Android Control RC Car over Bluetooth Read More »
The temperature in my office at work varies quite a bit depending on the time of day, season, and the whims of the other people I share the floor with. When I’m sitting at my desk shaking uncontrollably or sweating profusely it would be nice to know if it’s due to the temperature or just
Tempduino – Arduino Based Temp and Humidity Display Read More »
Creating a solder paste stencil for a toaster reflow oven or hot plate is simple when you have access to a laser cutter. I used the Laser Cutter at my local TechShop to create this and other PCB stencils. This Instructable assumes you have created a PCB and are able to generate the Gerber Files
Polyimide (Kapton) PCB Solder Paste Stencil Read More »
Combining Arduino and other shield modules, we make a mobile phone named Arduino Phone. Meanwhile, we printed a shell for it with the 3D printer. Although it’s not such fine as you think, even a little bit clunky, it’s still very cool. That is the point this is a cell phone made by ourselves. While,
Waveform generators (also called function generators) are useful for testing and debugging circuits. They can be used to test the frequency response of electronic components like op amps and sensors or to characterize and troubleshoot audio effects boxes and pedals. This waveform generator shield is powered by an Arduino. It outputs four waveforms: sine, triangle,
Arduino Waveform Generator Shield Read More »
This is an Example of how you can use the Arduino to monitor various environmental parameters And display them on a LCD screen. Note: I Added a Real Time Clock!! To see the steps, added parts and Sketch I added new steps.. Arduino uno R3 or compatible
Mini Arduino environment monitor Read More »
After finishing my hexapod I needed another project Over the last year I have bought numerous small break out boards on Ebay. So I came up with the idea to make an Arduino MP3 alarm clock. The idea is simple, an LCD that shows the date and time. A couple of buttons to set an
Arduino MP3 alarm clock Read More »
This project describes an Arduino-based FM transmission using the KT0803K Digital Stereo FM Transmitter Radio-Station-on-a-Chip. The KT0803K device is designed to process high fidelity stereo audio signal and transmit modulated FM signal over a short range. It features an on-board 20-bit audio ADC and supports standard I2C interface for frequency setting and power control the
Build Your FM transmission Station with Arduino Read More »
