battery Archives - Page 7 of 17 - Projects Tutorials Code Library for Atmels Atmega32 AVR

ONIO.ZERO MICROCONTROLLER RUNS WITHOUT A BATTERY

Leave a Comment / Electronics News Updates / Muhammad Bilal

It’s becoming quite obvious that traditional batteries are limiting the progress of IoT devices. They are expensive, they contain harmful chemicals and most importantly All-Batteries-Will-Die. Vemund Kval Bakken chief technology officer and co-founder at ONiO say the real problem with the battery approach to IoT comes when you actually consider the battery shelf life as well as the environmental […]

ONIO.ZERO MICROCONTROLLER RUNS WITHOUT A BATTERY Read More »

LinkIt One – 3d Printed Case

Leave a Comment / Blog / Muhammad Bilal

Hi this Instructables is designed to give you a way to protect your LinkIt ONE while you are using it. Let me first say that their are a couple of enclosures available, one of which is on thingiverse, however I was unable to find a model of the board itself anywhere. Saying this in sure

LinkIt One – 3d Printed Case Read More »

IW-RAINBOW-G27S – I.MX8 QUAD MAX/QUAD PLUS PICO ITX SBC

Leave a Comment / Electronics News Updates / Muhammad Bilal

iWave’s “iW-Rainbow-G27S” Pico-ITX SBC runs Linux or Android on an i.MX8 QuadPlus or QuadMax with up to 8GB LPDDR4, 2x GbE, 2x USB 3.0, 802.11ac/BT, M.2, HDMI in and out, and -40 to 85°C support. [via] The i.MX8 Quad MAX/Quad Plus Pico ITX SBC integrates Dual Cortex A72 + Quad Cortex A53 Cores, Dual GPU

IW-RAINBOW-G27S – I.MX8 QUAD MAX/QUAD PLUS PICO ITX SBC Read More »

Electronic Dice Using Attiny84

Leave a Comment / Blog / Muhammad Bilal

This project is an electronic dice using an Attiny84 chip. The Attiny84 works like an Arduino except it is a 14 pin chip and is has less memory and there is no built in programmer. I will be showing how to upload a program with an Arduino using the Arduino IDE and a USBtinyISP in

Electronic Dice Using Attiny84 Read More »

Theft Protector Using Tilt Sensor

Leave a Comment / Sensor - Transducer - Detector Projects / Muhammad Bilal

These days theft has become a serious crime. People are now much more conscious towards there precious items are purses and jewellery but due to the busy routine of this life we are not able to take care of our things. That constant detraction of threat is a great problem. But don’t worry, I am

Theft Protector Using Tilt Sensor Read More »

Crash Jacket

Leave a Comment / Blog / Muhammad Bilal

Sending out a little one to “just go play outside” is a great way to get them moving, and out of your hair for a while. Once they start riding bikes though, it can be a bit more scary. What happens if they fall and you are inside talking to Aunt May? Are you sure

Crash Jacket Read More »

Fish Food Feeder Using the Linkit One

Leave a Comment / Blog / Muhammad Bilal

In the past couple of instructables I have been using the LinkIt One board, the LinkIt One board is great for IoT projects and in this instructable I’m going to show you how to build a fish food feeder using the LinkIt One, this project is an upgrade to a project I did a while

Fish Food Feeder Using the Linkit One Read More »

TOREX & NGK PARTNER ON POWER MODULE REFERENCE DESIGN FOR IOT DEVICES

Leave a Comment / Electronics News Updates / Muhammad Bilal

Torex Semiconductor Co., Ltd. and NGK Corporation will exhibit a compact power module sample that can be processed through high-temperature surface mount with using Torex power management ICs and NGK EnerCera series batteries at CES 2020 (January 7th to 10th, 2020 at Las Vegas in the USA). [via] By combining the characteristics of NGK EnerCera batteries which

TOREX & NGK PARTNER ON POWER MODULE REFERENCE DESIGN FOR IOT DEVICES Read More »

LinkIt ONE Powered Wall-E

Leave a Comment / Other Projects / Muhammad Bilal

In this instructables, we give a simple example of how to add voice output and distance sensing on everyone’s beloved robot with MediaTek LinkIt ONE. Step 1: Materials 1. Linkit One with Battery 2. Mono Audio Amp Breakout with speaker 3. VL6180X Time-of-Flight Distance Sensor Carrier with Voltage Regulator 4. audio connectors: JST-PH 2-Pin SMT

LinkIt ONE Powered Wall-E Read More »

SIMPLE QUADCOPTER ( HUBSAN X4 )

Leave a Comment / Drones / Muhammad Bilal

In this Instructable I will let you know the basic building block of a Quadcopter and how to make it in a very simple way.Only thing you need is some skill on Soldering and few basic tools.I think it will give opportunity to the new hobbyists to sharpen their skills on this platform. [ Play

SIMPLE QUADCOPTER ( HUBSAN X4 ) Read More »